The influence of vibrations on surface roughness formed during precision boring
Journal Title: Archives of Mechanical Technology and Materials - Year 2017, Vol 37, Issue
Abstract
In this paper, the analysis of vibrations on surface roughness generated during boring with the application of the conventional boring tool and one with the damper is presented. The experiments included the measurement of vibration accelerations carried out with the piezoelectric sensor, as well as the evaluation of surface roughness parameters after each machining pass. The obtained results reveal that in the investigated range, no stability loss was found. Furthermore, the growth of the rotational speed induces the increase of vibration level, as well as the growth of the differences between the vibration values generated during boring with the conventional tool and one equipped with damper. Vibrations have also the direct influence on the machined surface roughness. In case of the tool equipped with the damper, the tool’s overhang L had more intense influence than rotational speed n. However, for the conventional boring tool this dependency was unequivocal.
Authors and Affiliations
Dariusz Korzeniewski, Natalia Znojkiewicz
Keywords
Related Articles
- EP ID EP199028
- DOI 10.1515/amtm-2017-0001
- Views 82
- Downloads 0
Reproducibility of machine tools' circularity test according to ISO 230-4 with respect to testing position
In this paper circularity of three different machine tools by Virtual Machine was analyzed. To get circularity we make a ball bar test according to ISO 230-4. The test is very common in engineering for a quick diagnostic...
Wear Analysis of Cemented Carbide during Turning of Cast Iron Considering Economical Machining Speed
The purpose of this paper is to find economical machining speed during turning of grooves for piston rings with various feeds. In the first part of the paper, literature analysis concerning durability of cutting tools is...
Diagnostic methods of detecting defects within the material with the use of active infrared thermovision
Article presents the methods of detecting defects within material with the use of active infrared thermovision. During the study ABS and PVC samples were used inside which internal structure defects and defects of glue c...
INFLUENCE OF PLASTICIZER TYPE ON PROPERTIES OF RENEWABLE ENGINEERING MATERIALS
Polymers and their composites are commonly used as engineering materials. They reveal a number of beneficial properties that allow their use in many industries. However, the main disadvantage of polymeric materials is th...
The influence of chemical composition on the dimensions change of hardened steels in nanofluids
The paper is presented influences of nanofluids, which are used in hardening process, to dimension changes, hardness and microstructure of hardened construction steel samples. Also is was made analyse with the use of En...