THE INFLUENCE OF WATER ON THE TRIBOLOGICAL PROPERTIES OF SOLE REGENERATIVE COVERINGS
Journal Title: Tribologia - Year 2015, Vol 264, Issue 6
Abstract
The methodology and the results of frictional composites destined for the regeneration of bottom of the shoes made of filled polyurethane resins and soot, glass granulate, culm, garnet, and aloxite were presented. During the test, composites worked with a sample made of Al2O3, which replaced flooring. The tests were performed in the conditions of technically dry friction and with the presence of water. The analysis of the test results led to a conclusion that the most appropriate composite to regenerate the layers of the bottom of a shoe is a composite with a soot, which has the highest coefficient of friction in the conditions of technically dry friction and in the presence of water.
Authors and Affiliations
Jan WULCZYŃSKI, Jacek PRZEPIÓRKA, Maciej WLAZŁO
Keywords
Related Articles
- EP ID EP255883
- DOI -
- Views 50
- Downloads 0
TESTING A PROTOTYPE FRICTION DRIVE TRANSMISSION
The article presents research on the mechanical properties of a drive system using an innovative mechanism converting rotary motion to progressive motion. The operating principle of the mechanism uses the friction-based...
WPŁYW PRĘDKOŚCI POŚLIZGU NA INTENSYWNOŚĆ ZUŻYWANIA ŚCIERNEGO STALI 38GSA I HARDOX 500
W pracy przedstawiono wyniki badań eksperymentalnych dotyczących intensywności zużywania stali Hardox 500 i 38GSA w skojarzeniu z materiałem silikatowym w zależności od prędkości poślizgu. Aby oddać rzeczywiste warunki p...
FATIGUE STRENGTH IMPROVEMENT OF STEEL ROLLERS IN CONVEYOR BELTS WHEN USING SHOT PEENING
Numerous factors influence the tribological wear of steel rollers used in conveyor belts. The difficulty in precise determination of these factors results from, among others, a complex and not completely explored wear me...
EVALUATION OF THE PROPERTIES OF DIAMOND-LIKE CARBON COATINGS LUBRICATED WITH IONIC LIQUIDS
The purpose of the study was to evaluate the properties of DLC coatings with ionic liquids used as lubricants. The type a-C: H DLC coatings were deposited onto the 100Cr6 steel substrate by PVD. The surface topography of...
TRIBOLOGICAL PROPERTIES OF DUPLEX COATINGS OBTAINED BY SEALING IN SUCCINIC ACID
The paper presents the tribological properties of duplex coatings obtained on aluminium alloy EN AW-5251 via hard anodising of aluminium in a multi-component electrolyte and subjected to sealing in succinic acid. Tribolo...