THE MAIN DIRECTIONS OF PREFABRICATED LARGE-PANEL SYSTEMS’ IMPROVING
Journal Title: Structure and Environment - Year 2019, Vol 11, Issue 2
Abstract
The article discusses the features of the formation and development of prefabricated large-panel systems in civil engineering. Their advantages and disadvantages are given taking into account a variety of urban planning, architectural, structural and technological solutions. The directions of their improvement are determined and considered, the main of which are: optimization of parametric characteristics of building typing elements using modern computer technologies; increasing the steps of bearing walls with the introduction of large-span systems; improvement of technical solutions for enclosing structures and their joints; the use of combined panel-block systems based on local materials; improvement of aesthetic qualities and means of architectural and spatial expressiveness.
Authors and Affiliations
Vadym Abyzov
Keywords
Related Articles
- EP ID EP626510
- DOI 10.30540/sae-2019-008
- Views 72
- Downloads 0
AN INFLUENCE OF SUPPORT WIDTH ON THE SHEAR CAPACITY OF REINFORCED CONCRETE BEAMS
This paper presents an influence of width changes of the supports used during the study of reinforced concrete beams on the value of angle θ – the angle of compressed concrete struts. This value is referred to as angle β...
RESEARCH PROBLEMS THAT OCCUR DURING THE ANALYSIS OF THE WORK OF FRP-STRENGTHENED TIMBER BEAMS UNDER SUSTAINED LOADS
A special focus was given to the variation in deformability characteristics of these materials and to the resulting processes that occur in the work of the strengthened beams. Aims and objectives of these studies were al...
RELATION BETWEEN RELIABILITY AND REINFORCEMENT MANUFACTURING ERRORS IN REINFORCED CONCRETE BEAMS
Ensuring the reliability of the structure or its elements is mainly dependent on the quality of materials and workmanship. A huge problem for reinforced concrete structures is both: employee awareness that the concrete w...
PROCESSES MODELLING IN TWO-NAVE BUILDING WITH NATURAL AIR EXCHANGE
The paper explains ventilation air exchange driven by the gravitational force and wind, and the major factors affecting the phenomenon. A mathematical model, namely a system of equations, for computations of natural vent...
THE TRANSFER COEFFICIENT OF HEAVY METALS FROM THE INPUT SEWAGE SLUDGE TO THE ASH
Sewage sludge incineration may have adverse impact on the environment due to heavy metals toxicity. Heavy metals concentrations in sewage sludge ash increased in comparison to concentrations in sewage sludge. The aim of...