The Modern State of Works in Field of Electron-Beam Technology of Melting and Evaporation of Metals and Non-Metals in a Vacuum
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
In developing of new processes for growing metal (composite) films, the main attention is given to controlling the metal vapour flows: through energy state of the condensing particles, their molecular composition, intensity, spatial distribution of the flow, etc. It is known that the widely accepted open-type evaporators, including quasi-closed ones, are characterized by instability of the directivity diagram of the vapour flow in time, even at constant temperature. Radiation load on the film growth surface from these sources is sometimes comparable to the energy of vapour flow condensation. Therefore, when they are used, it is quite difficult to produce reproducible film structures with controllable parameters. Particular difficulties arise at high evaporation rates, when micro-drops are usually present in the vapour flow.
Authors and Affiliations
I. N. GRECHANYUK, N. I. GRECHANYUK, G. CROITORU
Keywords
Related Articles
- EP ID EP659447
- DOI -
- Views 47
- Downloads 0
Tribological Studies Regarding the Crude Rapeseed Oil Press
The aim of this paper is to present a tribology test conducted on crude rapeseed oil press. The experiments were carried out with four-ball machine. The oil was tested at speed of 1000 rot/min and loads of 140 N and 200...
Detailed Microcontroller Architecture Based on a Hardware Scheduler Engine and Independent Pipeline Registers
In the world of real time operating systems, task switching, communication between threads and synchronization are implemented in software. Some of the mechanisms used may introduce big latencies in task recurrence, task...
Reducing the Zinc Emissions by Upgrading of Steel Scraps Quality
The steel production is one of the major sources of heavy metals emissions to the environment. There are several possibilities for prevention and minimization of these pollutants. Emission reduction measures focus on add...
Structure Effects over Behavior of Graphite Gray Iron in Running
The work aims at emphasizing the structure changes of graphite gray iron, as a result of make-casting conditions and their effects over behavior in running of several cast items. Researches consisted of complex character...
Static Analysis of the Structure Type Tank Thermally
This paper consider finite element analysis for structural analysis of a tank under thermal loadings. Geometric modeling is done in CATIA and for finite element analysis the author used FEA module in Catia. The aim is to...