The numerical investigation of thin-walled beams with modified C-sections
Journal Title: Archives of Mechanical Technology and Materials - Year 2018, Vol 38, Issue
Abstract
Demand for thin-walled structures has been increasing for many years. Cold-formed, thin-walled channel beams are the subject of presented research. The local elastic buckling and limit load of these beams subjected to pure bending are investigated. This study includes numerical investigation called the Finite Strip Method (FSM). The presented results give a deep insight into behaviour of such beams and may be used to validate analytical models. The number of works devoted to the theory of thin-walled structures has been steadily growing in recent years. It means that is an increasing interest in practical methods of manufacturing cold-formed thin-walled beams with complicated cross-sections, including also beams with web stiffeners. The ratio of transverse dimensions of beam to its wall-thickness is high, therefore, thin-walled beams are prone to local buckling that may interact with other buckling modes. The stability constraints should be always considered when using cold-formed thin-walled beams.
Authors and Affiliations
Michał Grenda
Keywords
Related Articles
- EP ID EP536310
- DOI 10.2478/amtm-2018-0010
- Views 55
- Downloads 0
IDENTIFICATION OF THE PARAMETERS OF A BALL-SCREW MECHANISM MODEL
In this article a method for identification of the static properties of a ball-screw mechanism is shown. The nonlinearity of its deformation was shown experimentally. Then, a model of the mechanism was made and its param...
THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON SURFACE TEXTURE OF DLD CEMENTED TUNGSTEN CARBIDE AFTER GRINDING
This paper presents the analysis of surface texture after grinding of claddings of tungsten carbide (WC). The workpiece material was cemented tungsten carbide produced by DLD (direct laser deposition) technology. The 3D...
The influence of chemical composition on the dimensions change of hardened steels in nanofluids
The paper is presented influences of nanofluids, which are used in hardening process, to dimension changes, hardness and microstructure of hardened construction steel samples. Also is was made analyse with the use of En...
INFLUENCE OF MACHINING OF EN-GJL-250 AND EN-GJS-400 CAST IRONS ON TRIBOLOGICAL BEHAVIOR
ectives of research on wear and friction is focused principally on solid lubrication. In the following paper, the tribological behaviors of two well-known, different cast irons, lamellar grey iron (EN-GJL-250) and sphero...
Multi-scale curvature tensor analysis of machined surfaces
This paper demonstrates the use of multi-scale curvature analysis, an areal new surface characterization technique for better understanding topographies, for analyzing surfaces created by conventional machining and grind...