The Performance of TIG Welded Similar and Dissimilar Weldments under Tensile Loading: An Experimental Investigation
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
Fusion welding is a widely used technique to prepare intermetallic joints of similar and dissimilar metals. Tungsten Inert Gas (TIG) welding is a popular fusion welding technique. Mechanical properties of a weldment are supposed to be an indicator of weldment quality, in present research the tensile strength of similar and dissimilar weldment of ASME SA 213 GR. T11 and BS 3059:1987 PT 1 ERW 320welded with TIG welding has been investigated. The results revealed that maximum tensile strength of dissimilar joint has been observed when welding current and gas flow rate was 110A and 10 Litre/min respectively and the specimen was preheated at 200° C. The experimental results have been statistically tested by using two way ANOVA and Multiple Regression Analysis. The mathematical predictive model has been discussed based on regression analysis.
Authors and Affiliations
Sewa Singh, Vikas Chawla, Gurbhindersingh Brar
Experimental Investigation of a Combined Solar Parabolic Dish and Trough Collector for Wax Melting Application
The increased cost of electrical energy which depletes conventional resources promotes switching over to renewable solar technology. An experimental study of a simple parabolic dish and trough solar collector combination...
Prediction of Optimal Torques from Gait Analysis Applying the Machine Learning Concepts
With the advancements in engineering and technology and with the advent of the fourth industrial revolution made the solution for complex and dynamic problems easier. Many researchers had incredibly investigated about th...
Improving Oxidation Behavior of (Alpha- Beta) (Cu-Zn40) Brass by Aluminum Addition
Brass alloys with a zinc content of 35 % and more have a mixture of the alpha (FCC) and beta (BCC) phases, that causes an increasing in hardness significantly. Further, this alloy can be formed only by hot-working. There...
Design and Modeling Studies of Tube End Expansion using Response Surface Methodology
The production of various profiles on the ends of the tubes is referred as tube end forming process. In the present work, the elevated temperature forming studies have been performed. The thin walled tubes have been subj...
MAGNANIMITY OF THERMAL POWER PRODUCTION ENGINEERING TECHNOLOGICAL BREAKTHROUGHS: AN EMPIRICAL ANALYSIS OF ADAPTATION TO CLIMATE CHANGE IN INDIA
In consideration of the practical fact, in terms of our long term needs and effects of thermal electric energy production, the Electric Energy-Water- Climate seasonal link makes it essential for adaptation to climate cha...