THE POSSIBILITY OF THE INTENSIFICATION OF THE HEAT TRANSFER IN FRICTION UNITS OF BAND-BLOCK BRAKES OF THE DRAW-WORKS
Journal Title: Проблеми тертя та зношування - Year 2016, Vol 71, Issue
Abstract
The limiting the heating elements of friction units of the band-block brakes of the draw-works is one of the most significant tasks of the parametric synthesis and design of friction pairs. The intensification of the heat transfer in friction units of the band-block brakes of the draw-works achieved by the performance of the pulley, composed of different materials and with different design parameters of brake discs. The layers of pulley rim are insulated between themselves to the inner vertical line of the left and right ledge. We’ve evaluated the most energy-loading areas of the combined brake pulley and illustrated thermal currents in it and showed the stress-strain state of the working surface of its rim. There were the following questions: the design features of the composite brake pulley with zones of bimetals and it work; thermal management in the frictional interaction of pairs of friction brakes and heat balance; heat transfer processes in a combined pulley rim and the stress-strain state.
Authors and Affiliations
A. I. VOLCHENKO, M. V. KINDRACHUK, D. A. VOLCHENKO, N. A. VOLCHENKO, V. S. SKRYPNYK
Keywords
Related Articles
- EP ID EP191695
- DOI -
- Views 149
- Downloads 0
ENERGYLOADING OF VARIOUS TYPES OF DISCS IN BRAKE DEVICES OF LIFTING AND TRANSPORTING MACHINES (PART TWO)
The accident-free and safe operation of lifting and transporting machines largely depends on the reliable operation of the friction pairs of brake devices. The experience of operating has showed that the wear-friction ch...
The deformation mode of the brake pulleys of the draw-works at multicells origin and development of microcracks
We’ve Illustrated the deformation mode of the brake pulleys of the draw-works at multicellsorigin and development of microcracks, based on the analysis of factors and dissemination offractals, acting on the working surfa...
RESTORATION OF PRECISION FRICTION UNITS
The article gives an overview of current trends in tribology related to the solution of problems of extending the resource of precision pairs. The question of the electrochemical recovery of the NS units in operation is...
WEAR RESISTANCE INCREASING OF THE PARTS RESTORED BY ELECTRIC CONTACT SURFACING
The wear resistance of the parts that were restored by the method of electric contact surfacing with heat-treated steel tapes is considered in the article. A comparative evaluation of wear resistance of the samples that...
FORMATION OF WEAR RESISTED HARDENED COATINGS ON THE SURFACE STEEL AT SUCCESSIVE ELECTRIC-SPARK ALLOYING BY CHROME AND COPPER IN THE PROTECTIVE ENVIRONMENT AND IN AIR
The purpose of this work is to study the microstructure, phase composition, microhardness and wear resistance of the steel (article 3) surface layers after the successive Electric-spark alloying (ESA) by carbide forming...