The Study of Metal-Old Wood Interactions Under the Influence of Pedological Factors
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
In the manufacture of wood objects, for binding and strengthening were used nails, cramps and other metallic elements, which in the archaeological site suffered degradation and deterioration processes, specific to metal-wood interface. The chemical and physical-structural characteristics of the products resulted from metal-old wood interactions can set up a database that can be used in authentication. For the study were taken wood samples from the Roman and Byzantine era, from Dobrogea and Moldova areas, resulted from the archaeological excavations, after year 2000, which presented in their structure metallic elements. The samples were analyzed with scanning electron microscope coupled with energy dispersion X-ray (SEM-EDX).
Authors and Affiliations
Ion SANDU, Mikiko HAYASHI, Marta QUARANTA, Costică BEJINARIU, Constantin STANCIU, Irina Crina Anca SANDU, Viorica VASILACHE
Keywords
Related Articles
- EP ID EP659505
- DOI -
- Views 60
- Downloads 0
Study of the Inclusions from the Oriented Grains Silicon Steels and their Influence on the Texture
The paper presents experimental results concerning the inhibitor phases generation by microalloying elements utilization. It was made experiments on three silicon steel charges. It was observed that the inhibitor phases...
Metallic Matrix Composites with Ceramic Particles. Wetting Conditions
The paper presents the main aspects regarding the mixtures obtained made up from aluminium melts and different kinds of ceramic particles (silicon carbide and boron carbide). Synthetically discussed are the wetting condi...
Selective Recovery by Solubilization of Metals Ions of Chromium, Iron and Zinc from Electroplating Sludge to Develop Pigments for Ceramics Industry
Electroplating industries discharge large amounts of heavy metals, including chromium (Cr), iron (Fe) and zinc (Zn) ions, in the wastewater resulted from technological processes, as well as in the sludge from wastewater...
Lean - A Philosophy Highlighting the Value Added Through Self Improvement and Waste Reduction, Concepts Presented from the Experience of the Romanian Automotive Industry
The definition of Lean n is: eliminating all sources of error, time and effort that are not necessary starting with the raw materials and up to the final product, from order to delivery and from design to launch. TRW is...
Electrochemical Corrosion Properties of SiC/Ni Nano-Composite Coatings in 0.5M NaCl
Nano particles have an influence on nickel electrocrystallisation steps: decreasing charge transfer resistance and activating the nickel reduction. The SEM – EDX surface morphology and TEM structure of the electrodeposit...