The study of technologies to improve physical-mechanical and chemical properties of reaction sintered ceramic materials on the basis of silicon carbide
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 86, Issue 2
Abstract
The ways of improving physical-mechanical and chemical properties of reaction-sintered ceramic materials based on silicon carbide are described. Various means of processing ceramic materials are studied and analysed. The technologies of obtaining the resulting components, removing free silicon from products, and binding impurities in the surface layers are improved. It is found that the increase of operating temperatures and the use of ceramic materials based on silicon carbide in demanding conditions can be achieved by introducing additives into the mix, strengthening the dispersed particles and applying a protective coating. The synthesis and crystallization of secondary silicon carbide on the grains of primary silicon carbide, and dissolution and recrystallization of submicron particles of primary silicon carbide occur at high temperatures and in the presence of molten silicon. Based on the published data analysis and conducted research, the complex of measures for improving physical-mechanical and chemical properties of reaction sintered ceramic materials based on silicon carbide is proposed.
Authors and Affiliations
Vasyl Kovbashyn, Ihor Bochar
Keywords
Related Articles
- EP ID EP257699
- DOI -
- Views 57
- Downloads 0
Reissner’s plate bilateral bending containing coaxial through-the-thickness slit and crack taking into account contact zone width of its faces
Construction of the cracked plate bending problems solutions forms an important and actual in terms of theory development and practical applications scientific direction. They make it possible to determine stress and dis...
Analytical and simulation modeling of the impact of vehicles on the ecological situation in ukraine and the ways of its improving
A mathematical model, which determines the amount of fuel dependence for a period of time from the life of the total vehicle fleet of the Ukrainian population; the ratio of the number of different power classes of vehicl...
Automated system for irradiation of biologically active points of the human body
The automated system for the control of the absorbed energy dose of laser irradiation in the frequency range of modulation is developed and proposed.The possibility of choosing radiation frequencies with the maximum abso...
The influence of height of angular profile of rods on rectangular welded truss deformation
The paper is devoted to the study of deformation properties of five 18000 x 3600 mm welded rectangular trusses under the external static loads. Experimental specimens are made of the steel rolled angular profiles with di...
Construction of welded truss nods using ansys software complex
The behavior of 18000 x 3600 mm welded rectangular truss under external loading was studied in the current paper. The prototype is made of paired steel rolled angular 100h100h7 mm profile. The plates in nodes are tapered...