THE TECHNIQUE AND SOFTWARE IMPLEMENTATION FOR CREATION THE LUT-CIRCUIT INFORMATION MODEL PLACED IN THE FPGA ENVIRONMENT
Journal Title: Вісник Кременчуцького національного університету імені Михайла Остроградського - Year 2018, Vol 1, Issue 108
Abstract
Purpose. To develop the technique, with the help of which the creation of LUT-circuit information model for FPGA chip program code integrity monitoring (the resulting model should describe the details of the location of the LUTs in the space of the FPGA chip, their program codes, the interconnection of the units with each other and with the external environment), to bring the details of this technique to the level sufficient for software implementation. Methodology. The analysis of CAD Altera Quartus structure in the environment, where the target technique is to be implemented, has been made. As a result of analysis the possibility of interaction of software realizing the proposed technique with CAD Altera Quartus through the corresponding software interface API Quartus has been found out. The possibility to obtain the in-formation necessary for the creation of LUT-circuit information model through API Quartus has been researched. Results. The sequence of actions of the proposed technique has been formulated. The information model, which is created on the basis of data obtained with the help of the technique, has been formalized. Software implementation of each stage of the technique, based on the use of TCL-commands of the Quartus API, has been described. Originality. The approaches to the automated analysis of program code and structure of FPGA-projects with the view of their integrity monitoring were further developed. Practical value. The technique offered in the work and the software, which implements it, can be applied in organizing the data preparation subsystem within the framework of the system of FPGA chip program code integrity monitoring. References 10, tables 3, figures 2.
Authors and Affiliations
K. Zashcholkin
Keywords
Related Articles
- EP ID EP659459
- DOI 10.30929/1995-0519.2018.1.59-64
- Views 86
- Downloads 0
RESEARCH OF MECHANICAL CHARACTERISTICS OF WELDED-SOLDERED THIN-WALLED STRUCTURES MADE OF HEAT RESISTANT MULTICOMPONENT ALLOYS
Purpose. To establish the regularities of the non-detachable compound formation of a thin-walled elements from the Ni-20Cr-6Al-1Ti-1Y2O3 alloy and to determine the functional condition of the soldering modes influence o...
BIOINDICATION RESEARCH OF SULFUR COMPOUNDS AEROTECHNOGENIC DISSEMINATION INTO THE ATMOSPHERE OF CHERKASY WITH THE USE OF ACER PLATANOIDES L.
Purpose. To conduct research bioindication aerotechnogenic distribution of sulfur compounds and there scattering in urban ecosystem using Acer platanoides L. leaf lesions and fungus species of ascomycete Rhytisma acerin...
ASSESMENT OF THE SUITABILITY OF INFRASTRUCTURE OF THE POPULATED LOCALITIES THAT ARE INVOLVED IN ASSISTANCE TO DITCHING VICTIMS
Purpose. To isolate and explore the influence of factors that represent elements of infrastructure that are common to most populated areas and which can be recruited when it is necessary to provide assistance to victims...
CALCULATION OF ELECTRICAL IMPEDANCE OF OSCILLATING PIEZOCERAMIC DISK IN THE AREA OF HIGH FREQUENCIES
Purpose. The aim of this work is to calculate the electrical impedance of oscillating piezoelectric disk in the high-frequency range. Methodology. The final goal of mathematical modeling of the vibrating piezoelectric el...
MODERN TRENDS IN DEVELOPMENT OF THE INDUSTRIAL COMPLEX OF UKRAINE
Purpose. To determine current trends in the development of the industrial complex of Ukraine on the basis of structural modernization in key areas. Methodology. Methodological principles and applied instruments of scient...