THEORETICAL AND EXPERIMENTAL ANALYSIS OF VARIATION OF AXIAL FORCE IN THE SCREW CONNECTIONS
Journal Title: Tribologia - Year 2011, Vol 240, Issue 6
Abstract
Two studies show a scatter in the values of initial-clamp-bolt force data during the assembly of screw connections. Theoretical analysis is based on the friction coefficient of variation even for the same type of material screws. In practice, using different materials of construction further enhances its range of variability. This causes a large scatter of values in the bolt-axial force as a function of torque. Analysis of the experimental study involves the variability of the coefficient of friction depending on the type of cover screws. The study suggests two types of screws to stabilise the axial force as a function of torque, as well as increase its value in relation to uncoated screws. The use of a cover can damage the screw joint during assembly.
Authors and Affiliations
Jan Ciecieląg
Keywords
Related Articles
- EP ID EP270579
- DOI -
- Views 47
- Downloads 0
THE INFLUENCE OF SOLID LUBRICANTS USED FOR THE LUBRICATION OF WHEEL FLANGES ON RAILWAYS TO REDUCE THE CORROSION OF RAILS
The paper presents the influence of selected solid lubricants used for the lubrication of wheel flanges of railways on the formation and development of corrosion. Tested solid lubricants consisted primarily of graphite,...
EVALUATION OF TRIBOLOGICAL PROPERTIES OF SELECTED FILLED WITH CHEMICALLY ACTING ADDITIVES
The article discusses the influence of the type of porous sinters on tribological properties, which are the friction, wear, and temperature of the friction area. The following porous sinters were selected for the study:...
THE EFFECT OF FRICTION ON THE EFFICIENCY OF SEWING MACHINES IN THE SHOE INDUSTRY
This paper contains a description of tests and results obtained from the tribological system of a sewing machine with a traditional power transmission system compared with a power transmission system with an additionaly...
PHENOMENON OF THE LUBRICATION MECHANISM OF HUMAN HIP JOINTS
The problem concerned with the explanation of a perfect lubrication mechanism is presented in this research. This mechanism has neither been described nor used in any other bearing nodes so far. The major consideration h...
Niskotemperaturowe charakterystyki tribologiczne stalowych skojarzeń ciernych
Dane zawarte w katalogach materiałowych dotyczące właściwości tribologicznych materiałów podawane są dla warunków pracy w temperaturach dodatnich, co może być błędne w przypadku ich wykorzystania przy doborze materiałów...