Thermodynamic Assesment of The Cu - Ti System in Microalloyed Copper Base Alloys
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
The correlations made between thermodynamic and kinetic data of the heterogeneous systems provided insight into the alloys properties. Experimental researches presented in this paper refer to the thermodynamics of Cu-Ti binary system for very low concentrations of titanium in copper from 2 10340.010006.0 mole fractions at 1372 K, at 1423 K temperatures. By electrochemical method the thermodynamics activities and activity coefficients at 1372 K, 1423 K were determined. The Associated Solution Model (ASM) parameters have been used to describe the thermodynamic properties of the Cu-Ti dilute solutions. Analytical expression has been derived to express the activity of titan in copper and the activity coefficient. The first and second order Wagner’s selfinteraction parameters were given as a function of ASM parameters.
Authors and Affiliations
Maria VLAD
Keywords
Related Articles
- EP ID EP663523
- DOI -
- Views 67
- Downloads 0
The Action of the Ultrasonic Vibrations over the Diffusion Process in Gases and Liquids
Among the new method of studying the properties of the substance and the influence over the most various physical and chemical processes, used in different industrial domains, the main place is occupied by the usage of s...
Methods to Reduce Gas Emissions Onboard Ships
Regarding the latest IMO requirements, the EEDI (Energy Efficiency Design Index) is mandatory to be limited as levels under IMO MEPC requirements. The paper presents some paths to reduce EEDI as are applied onboard a 555...
Thermomechanical Process Simulation to Predict Processing of Mechanical Properties of Alloys Al-Zn-Mg-Cu
This paper presents how to perform simulation (prediction) mechanical properties of aluminum alloys of the system Al-Zn-Mg-Cu. Graphical interface that can predict the mechanical properties studied was performed using MA...
Siderurgy Slags Recovery in Building Industry
During the metallurgical processes of iron and steel elaboration, besides the basic products, it results a serious of secondary products (wastes) in high quantities but with a high recycle – recovery potential, and their...
Determination of Friction Coefficient at Sliding Indentation of Laser Cladding with Ni – Cr – B – Fe – Al Alloy
To increase resistance to wear of the surface layers made from 0.45% C steel, a multilayer deposit by powder injection with the chemical composition Cr 8.9%, 4.5% Fe, 5.1% B, 2, 4% Al, 0.6% Cu, and Ni was tested in a mol...