Three-dimensional functional tolerancing automated by MT2M and Qualitative Tol
Journal Title: Recueil de mécanique - Year 2017, Vol 2, Issue 1
Abstract
This paper deals with automatic three-dimensional (3D) functional tolerancing. A combination between the Minimum Transfer Modified Method (MT-2M) and qualitative tolerancing method for prismatic parts is developed. The MT-2M is used for the recognition of functional surfaces. This technique lies in integrating the projections of surfaces of the parts under consideration along the three axes (X, Y and Z) and the contacts between these same surfaces in one table of matrix representation of the assembly. Then, the adequate qualitative tolerancing of the part under study is determined according to the number of functional conditions (CF), their types, and by using an ISO (International Organization for Standardization) analysis. Finally, a 3D functional tolerancing (dimensioning and tolerancing) is then obtained in localization and orientation, to be installed on the drawings of different parts of the assembly. A manual application of this method to a simple example of assembly, and the software developed in this study are presented.
Authors and Affiliations
Djezouli MOULAI-KHATIR, Said HAMOU, Abdelghafour BOURDIM
Keywords
Related Articles
- EP ID EP302080
- DOI 10.5281/zenodo.1134957
- Views 59
- Downloads 0
Nanoindentation applied to the study of biomaterials
A biomaterial is a material used and adapted for medical applications. In order to extend the life of the human body, the biomaterial is the alternative most considered by doctors. Metals used as biomaterials have high y...
Presentation of a three-dimensional metrology software
This paper presents a three-dimensional metrology software,named « GFDSoft » Geometrical Form Defect Software, developed by MOULAI-KHATIR. GFDSoft implements the least squares adjustment criterion (which is the most comm...
Characterization of organic/inorganic perovskite material CH3NH3PbI3 prepared by spray pyrolysis with moving nozzle method
Methylamine lead tri-iodide (MAPbI3 or CH3NH3PbI3) is a promising organic/inorganic perovskite material in photovoltaic applications. It attracted researcher's attention for its good power conversion efficiency that step...
Characterization of crack parameters by the approach of virtual strain gages using a SENT specimen
The main objective of this work is to highlight the effectiveness of a numerical method proposed for the evaluation of the stress intensity factor (CIF), T-stress and the biaxiality parameter β, using virtual strain gage...
The highlighting of an internal combustion engine piston ring radial oscillations
This paper deals with the definition of the lube-oil film thickness in the piston ring cylinder liner junction of an internal combustion engine. At first, a mathematical model for the estimation of the film thickness is...