Train Speed Following Control Based on Precise Parking and Energy Saving Optimization
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective Automatic train operation (ATO) can achieve train autonomic running by controlling each actuator of the train, and is of great significance to reduce the operating cost of rail transit and further ensure train operation safety. In response to the problems such as low parking precision and failure to optimize energy consumption with the single control method in the process of ATO speed following control, a strategy for ATO speed following control is proposed. Method Based on the traditional PID (proportional integral-differential) control, the proposed approach performs online turning and adjustment of PID parameters by using fuzzy controller, and designs algorithms for train precise parking and energy saving operation separately. When the train is running closer to the stopping point, the speed feedback control method based on the preset target speed will fall out of use, the acceleration required for precise parking is calculated instead, and the acceleration feedback control is performed to improve the parking precision. At the same time, an energy saving cruise condition with traction-coasting cycle during the train cruise is designed. When the train is detected to meet a certain cruise condition, the corresponding condition shall be used to optimize the overall operation energy consumption. Result & Conclusion A simulation model for the train and controller is established in MATLAB/Simulink simulation software. The proposed method and model are verified to be effective by comparing the performance indicators such as precise parking and energy saving under PID control and fuzzy adaptive PID control.
Authors and Affiliations
Yunlong PENG, Yuanlei KANG, Yichen YU, Jie LI
Keywords
Related Articles
- EP ID EP737768
- DOI 10.16037/j.1007-869x.2024.06.039
- Views 35
- Downloads 0
Research on Brake Disk Heat Dissipation Rib Arrangement Spacing for High-speed Railway Train
Objective As the design speed of trains reaches 400 km/h level, the flow field environment under the train becomes more complex, highlighting the issues such as increased brake disc resistance and power consumption. It i...
Key Technologies of Large-diameter Shield Tunneling in Sand and Gravel Strata
[Objective] Key construction technologies for large-diameter shield tunneling in sand and gravel strata are summarized and analyzed, including shield machine model selection, shield launching and receiving, and shield ex...
Probabilistic Evaluation of Grouting Reinforcement on Settlement Control Effectiveness in Shield Tunneling Construction
［Objective］ In order to reduce the ground disturbance when the shield tunnel underpasses buildings, it is necessary to study the settlement control effect of grouting reinforcement during shield tunneling under the bui...
Constitutive Model and Experimental Study of Stud Steel-Shotcrete Interface Bond-Slip in Mining Method Tunnel Initial Support
Objective It is aimed to elucidate the constitutive relationship of bond-slip at the interface between stud steel and shotcrete in the initial support of mining method tunnel. Method Four different working conditions are...
Research on the Impact of Wheel Polygonalization on Metro Bogies
Objective The objective is to investigate the impact of wheel polygonalization on metro bogies, thereby strengthening the control requirements for wheel polygonalization, and enhancing the operational quality and safety...