Traverse Grinding of X6CrNiMoTi Steel and its Final Surface Quality for Giving Cutting Conditions
Journal Title: Production Engineering Archives - Year 2015, Vol 0, Issue 2
Abstract
Machining of stainless steels is often an important used technology. Products made from these materials are often used in mechan-ical engineering and the quality of workpiece surface roughness after machining respective grinding is one of the important parameters that illustrates the quality of the machining process. This paper deals with the influence of cutting conditions when grinding steel X6CrNiMoTi (EN ISO) on the machined quality surface (roughness, circularity). Grinding of samples was carried out by feed grinding and the measured values were analyzed. On the machined samples parameters were all monitored and measured in the laboratory of precision measurements at the Faculty of Production Technology and Management of Jan Evangelista Purkyně University in Ústí nad Labem and the devices Hommel tester T1000 and Hommel tester Form 1000 were used. Measuring was done according to ČSN EN ISO 4287.
Authors and Affiliations
Nataša Náprstková, Martin Novák, Júlia Hricová
Keywords
Related Articles
- EP ID EP165422
- DOI -
- Views 82
- Downloads 0
PDCA cycle as a part of continuous improvement in the production company - a case study
The paper presents a case study of the practical use of Deming cycle in a manufacturing company, from the plastics processing industry, from the sector of small and medium-sized enterprises. The paper is a study of liter...
The influence of modification for structure and impact resistance of silumin AlSi11
In this paper the results of the modification process of alloy AlSi11 as well as the influence of modification for structure and im-pact resistance have been presented. The investigation revealed that the modification of...
Numerical methods for analysis of mechanical systems with uncertain parameters
The paper presents new and improved numerical methods designed for analysis of mechanical systems with uncertain parameters. Uncertain parameters in mechanical systems are described by means of possibility theory. The ma...
Evaluation of the quality of cyanoacrylate adhesive joints using the example of poly(methyl methacrylate) and polycarbonate
Adhesive bonding is one of the simplest and most common methods used for joining materials. It is applied in both production and repair works. The most commonly used adhesives are cyanoacrylates, due to the possibility o...
DIFFICULTIES IN WORK SAFETY MANAGEMENT IN A COMPANY PRODUCING STEEL FLAT BARS
According to research, metal processing industry has the highest risk of accidents at work, due to the necessity for personal protective equipment use and strict execution of safety rules and procedures. The paper presen...