Tribological Behaviour and Surface Roughness Quality of 3D Printed ABS Material
Journal Title: Journal of Materials and Engineering - Year 2023, Vol 1, Issue 3
Abstract
Additive manufacturing or 3D printing is one of the newer methods of manufacturing. The basic difference to other types of production is that the material is added in the form of layers. There are many types of technologies in 3D printing, but the most common is fused deposition modeling. This technology uses different types of thermoplastic materials to build an object. This paper will present the tribological characteristics and surface roughness measurement of samples printed on a low-cost 3D printer using thermoplastic materials ABS.
Authors and Affiliations
Strahinja Djurović, Dragan Lazarević, Milan Ivković, Milan Mišić, Bojan Stojčetović, Živče Šarkoćević
Keywords
Related Articles
- EP ID EP727417
- DOI 10.61552/JME.2023.03.004
- Views 16
- Downloads 0
Statistical Modeling and Optimization of Surface Roughness for PLA and PLA/Wood FDM Fabricated Items
During last decades fused deposition modeling (FDM) has emerged as a widely applied additive manufacturing technology for numerous engineering applications. The present work investigates the effects of two independent va...
The Technological Factors and Operating Conditions Influence on the Molybdenum Disulfide Coatings Tribological Properties
Molybdenum disulfide is a widely used solid lubricant operates successfully under extreme conditions such as vacuum, high or low temperatures, high loads etc. Magnetron sputtering is one of the most common method of appl...
Triboinformatic Modeling of Wear in Total Knee Replacement Implants Using Machine Learning Algorithms
Pin-on-disk (PoD) tests, the most prevalent studies, are being carried out in order to evaluate tribological behaviour of different bearing materials. However, the comparison of results obtained from the PoD tests is ver...
The Modelling of Surface Roughness After the Turning of Inconel 601 by Using Artificial Neural Network
This research includes longitudinal turning of Inconel 601 in a dry environment with PVD coated cutting inserts. Turning was performed for different levels of cutting speeds, feeds, depth of cuts and corner radius. After...
Effect of Shaft Speed, Crack Depth and L/D Ratio in Rotor Bearing System: Using Taguchi Method and ANOVA
Vibration is produced by imbalance, positioning, mechanical softness, shaft cracking, and various defects in spinning machinery. In recent years, rotor defect diagnostics have become more important. This study looks at t...