TRIBOLOGICAL PROPERTIES APT T5W DIFFERENT NODES RELATED TO FRICTION AND TYPES OF MOTION
Journal Title: Tribologia - Year 2011, Vol 240, Issue 6
Abstract
The aim of the paper is to show the tribological properties of aluminium oxide coatings deposited on EN-AW-5251 aluminium alloy by the hard anodising method. The oxide coating is characterised by fibrous structure and porous surface morphology, and pore size depends on oxidising conditions. Production of hard and wear resistant oxide coatings is the universally used method for the improvement of the tribological properties of aluminium. The oxide coatings were tested in pairs with T5W plastic, which is used to production of seals for piston devices. Tribological tests were carried out using the following test equipment: T-01 (rotational motion), T-05 (rotational and oscillating motion) and T-17 (reciprocating motion) under dry friction conditions. For all types of friction pairs, the oxide coatings were produced in the same conditions of current density, electrolyte temperature and oxidation surface. This study included analyses of the tribological characteristics for individual types of motion. The analysis of tribological test results has been complemented with the results of the surface morphology tests.
Authors and Affiliations
Piotr Duda, Marek Bara
Keywords
Related Articles
- EP ID EP270581
- DOI -
- Views 58
- Downloads 0
CHANGES OF SURFACE LAYER PROPERTIES IN GEAR TEETH AFTER SHOT PEENING
Considering the phenomenon during teeth cooperation in a toothed gear and produced loads within the macro and micro areas of contact surface, one should be paying attention to the type and condition of the surface layer....
TRIBOLOGICAL AND MATERIAL CONDITIONINGS OF THE HIP ENDOPROSTHESES APPLICATION
Hip joint arthroplasty is a common operation at the Orthopaedic Surgery Departments. An increasing demand for implantation of the hip joints results from: longer and longer life span, improper nutrition and increasin...
THE POSSIBILITIES OF STRENGTHENING OF THE SURFACE LAYER OF NODULAR IRON BY LASER ALLOYING WITH SILICON NITRIDE ON THE EXAMPLE OF A ROCKER ARM
In the order to increase the resistance to the friction wear of machine parts appropriate surface treatment application is needed. The aim of presented research was to evaluate the laser alloying with silicon nitride eff...
MODELLING OF THE RELIABILITY OF TOOL- -WORKPIECE SYSTEM IN MULTI-STAGE DRAWING PROCESS
The waste of tools in drawing process is characterised by surface phenomenon occuring in their upper layer. During co-operation of elementary contact area, the deformation process of drawn material takes the significant...
THE INFLUENCE OF ZINC DIALKYLDITHIOPHOSPHATE AND PHENOL ANTIOXIDANT ON THE EFFICIENCY OF UNSATURATED ANTIWEAR ADDITIVES
The aim of the work was to determine the influence of antioxidants, i.e. 2,6-ditertbuthylphenole (DBF) and zinc dialkyldithiophosphate (ZDDP) on the antiwear (AW) activity of the model lubricant, containing 1% w/w 3-ally...