TRIBOLOGICAL PROPERTIES OF Al2O3/ZrO2 SINTERED CERAMICS
Journal Title: Tribologia - Year 2019, Vol 283, Issue 1
Abstract
The paper presents mechanical and tribological properties of Al2O3/ZrO2 composite sinters with different proportions of Al2O3 and ZrO2 phases. These materials are commonly used in dry friction contact due to relatively low manufacturing costs of even complex shapes of products and the possibility of working at elevated temperatures. The tests were carried out by the ball-on-disc method at temperatures of 20, 150, 300, and 500°C. A ball made of Al2O3 was used as a counterpart. The results were compared with the following sintered mono-phase materials: Al2O3(alumina) and tetragonal yttria-stabilized ZrO2 polycrystallines (Y-TZP). The tests showed the significantly better properties of composite materials.<br/><br/>
Authors and Affiliations
Grzegorz WIĄZANIA, Marcin KOT, Agnieszka WOJTECZKO, Zbigniew PĘDZICH
Keywords
Related Articles
- EP ID EP519240
- DOI 10.5604/01.3001.0013.1440
- Views 49
- Downloads 0
EXPERIMENTAL STUDIES ON PSEUDOPLASTIC AND THIXOTROPIC PROPERTIES OF LITHIUM GREASES WITH ATR -FTIR SPECTROSCOPY
The paper deals with experimental studies on pseudoplastic and thixotropic properties of lubricating greases with ATR-FTIR spectroscopy. The research was done on lithium greases thickened by lithium 12-hydroxystearate wi...
Wybrane własności tribologiczne stopu z grupy FeAl
W ramach przedstawionych badań analizie poddano własności tribologiczne stopów z grupy FeAl. Jako materiał wyjściowy do badań zastosowano stop FeAl w formie odlewu oraz otrzymany z proszku stopu. Dyskusji poddany został...
PROPERTIES OF A TRIBOLOGICAL SYSTEM WITH A DIAMOND-LIKE CARBON COATING LUBRICATED WITH ENVIRONMENTALLY FRIENDLY CUTTING FLUID
This article presents experimental results obtained for an a-C:H:Si coating deposited on a 100Cr6 steel disc in sliding contact with a 100Cr6 steel ball in the presence of zinc aspartate-based cutting fluid. The study in...
TRIBOLOGICAL PROPERTIES OF HYPEREUTECTOID ALLOY STEELS
Influences of the microstructure and material characteristics on tribological properties of hypereutectoid 80CrMoV4-3 and 90CrV6 alloy steels are considered in this paper. Investigations concerned steels, the application...
THE ANALYZE OF FRICTION CONDITIONS ON A RAKE FACE WHEN FINISH TURNING ON THE BASE OF CHIP THICKNESS CHANGES
In the paper, the results of the analysis of theoretical equations to calculate middle coefficients of friction on a tool rake face during finish cutting are described. Equations viewed were compared with experimental re...