TRIBOLOGICAL PROPERTIES OF CRC+CRN TYPE HYBRID LAYERS PRODUCED IN COMBINED VACUUM CHROMIZING PROCESS AND PVD TREATMENT
Journal Title: Tribologia - Year 2011, Vol 239, Issue 5
Abstract
Tribological properties of the CrC+CrN type hybrid layers, produced on X210Cr12 steel in vacuum chromizing process combined with arc evaporation PVD treatment, have been investigated. A comparison of the CrC+CrN type hybrid layers with the CrC single carbide layers, produced on steel surface without CrN coating, has been performed. Tribological properties of the layers were performed by means of taper-three rolls test. It has been proved, that the wear resistance by friction of hybrid CrC+CrN type layers is above two times higher, than that for the single CrC carbide layers.
Authors and Affiliations
Ewa Kasprzycka, Mariusz Koprowski, Jerzy Bielanik, Sławomir Pilarczyk, Bogdan Bogdański, Iwona Bauer
Keywords
Related Articles
- EP ID EP270997
- DOI -
- Views 39
- Downloads 0
POSSIBILITIES OF APPLICATION OF NEW MATERIALS FOR CHAIN DRUMS OF ARMOURED FACE CONVEYORS WITH AN INCREASED WEAR RESISTANCE
The primary purpose of this study was to carry out comparative research concerning the wear properties of materials used for chain drums, both of domestic and foreign production, as well as of ADI cast iron, which was co...
THE INFLUENCE OF PULSE ANODIC PROCESS PARAMETERS ON THE TRIBOLOGICAL PROPERTIES OF THE NANOCERAMIC AL2O3 SURFACE LAYERS
The paper presents a study on the influence of production parameters of Al203 nanoceramics surface layers on the tribological properties in cooperation with the PEEK/BG plastic. The Al2O3 surface layers were prepared by...
EXPERIMENTAL STUDIES ON PSEUDOPLASTIC AND THIXOTROPIC PROPERTIES OF LITHIUM GREASES WITH ATR -FTIR SPECTROSCOPY
The paper deals with experimental studies on pseudoplastic and thixotropic properties of lubricating greases with ATR-FTIR spectroscopy. The research was done on lithium greases thickened by lithium 12-hydroxystearate wi...
INFLUENCE OF SURFACE LASER TEXTURING ON FRICTION AND WEAR OF PTFE DURING SLIDING AGAINST STEEL
The paper presents research and analysis of PTFE wear during cooperation with steel. The surface of steel elements was subjected to laser texture. Three different patterns of texture were applied to the surface of steel...
EFFECT OF EXTERNAL LOAD ON THE PROCESS OF STEEL CONSUMPTION IN THE SOIL MASS
This paper presents the results of a study on the effect of external load on the course and intensity of Hardox Extreme hardness steel wear in sandy soil. The research was conducted under laboratory conditions using a ro...