TRIBOLOGICAL PROPERTIES OF THE PLASTICALLY CONSOLIDATED ALUMINIUM POWDERS
Journal Title: Tribologia - Year 2013, Vol 247, Issue 1
Abstract
The results of the tribological tests performed on the aluminium (1070 grade) produced by rapid solidification and plastic consolidation powders are presented in the article. The results were compared to solid aluminium in the same composition. The samples were subjected to wear tests performed by a block-on-ring wear tester. Tests were performed in the conditions of dry tests and with the application of the lubricant (OCG 1000) at the beginning of the process. Results indicate a considerable increase in the wear of the materials in the condition of dry friction in comparison to the friction with the application of the fluid at the beginning of the process. Applying 7075 alloy as a rotating ring affects the abrasive wear of both the sample and rotating ring.
Authors and Affiliations
Beata Leszczyńska-Madej, Marcin Madej
Keywords
Related Articles
- EP ID EP270326
- DOI -
- Views 30
- Downloads 0
ANALYSIS OF THE PROCESS OF WEAR OF A BRONZE–ALLOY CAST IRON KINEMATIC PAIR UNDER MIXED FRICTION CONDITIONS
The paper presents the results of model studies of wear under mixed friction conditions of the worm–worm rack kinematic pair, where the worm is made of bronze CUA19Fe3, while the worm rack is of alloy cast iron. This pai...
DISCUSSION ABOUT THE FUNDAMENTAL PROBLEMS OF TRIBOLOGY: Part 16 SOCIAL FUNCTIONS OF TRIBOLOGY
The article presents the description of the basic functions of tribology as an independent scientific field. It represents an attempt to generalise the tasks of tribology that are quite often formulated in the literature...
THE OXIDATION STABILITY AND LUBRICATING PROPERTIES OF OIL COMPOSITIONS
The oxypolymerization process of plant oil was modified with application of antioxidant (Irganox, BASF) and/or with infusion of an inert gas through the reaction mixture in order to obtain stabilised lubricating properti...
THE EFFECT OF ABRASIVE MASS MOISTURE CONTENT ON THE ABRASION-RESISTANT STEEL WEAR RATE
This paper presents the results of tests for Hardox Extreme Steel wear rate in an abrasive mass of varying moisture contents. The tests were conducted by the “rotating bowl” method using quartz sand with a grain size of...
MODIFYING THE OPERATING CONDITIONS OF FRICTION PAIRS WITH SOLID LUBRICANT BASED ADDITIVES
The article presents the results of tests into the application of additives based on solid lubricants of copper, lead, and molybdenum disulphide to AN68 and CE / SF SAE 15W/40 lubricating oils. The test results were coll...