Ultrasound and Microwave Aided Natural Dyeing of Nettle Biofibre (Urtica dioica L.) with Madder (Rubia tinctorum L.)
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 4
Abstract
The success of suture yarn depends upon its tensile and bending properties. As sutures pass through the tissue, it should possess enough strength to hold the tissue together and should be flexible so as to be knotted. The aim of the present work was to improve the strength of silk suture without affecting its bending properties. Silk sutures were fabricated using a circular braiding machine. Structural variations were made by varying the diameter and by producing core sheath suture yarn. The resulting suture yarn is coated with chitosan – a biopolymer. The mechanical performances of suture materials coated with and without chitosan were studied and compared with commercial suture. It was observed that the suture with a core-sheath structure performed well during tensile and knot testing. The coarser yarns exhibited higher bending rigidity and lower knot strength than the finer suture yarns.
Authors and Affiliations
Arzu Yavas, Ozan Avinc, Görkem Gedik
Research on the Performance of a Drafting Device for the Four-Line Compact Spinning System
Compact spinning is one of the most important improvements of traditional ring spinning, which is implemented by adding a fibre condensing device to condense the fibre bundle and decrease the spinning triangle, thereby i...
Rola bielizny jako elementu składowego odzieży ochronnej dla odlewnika
Podczas pracy przy piecu odlewniczym, pracownik narażony jest na działanie wysokiej temperatury. Ubranie ochronne dla odlewnika wykonane jest z aluminizowanej tkaniny, która zapewnia ochronę przed działaniem wysokiej tem...
Simulation of Delamination in a Composite Using a Shell-beam Mesoscale Finite Element Model
aaa<br/><br/>
Preliminary Study on the Exploitation of Chinese Fevervine Fibre
In this paper, the Rubiaceae Chinese Fevervine stem as raw material was used, with pool dipping, sodium hydroxide scouring and acid dipping as degumming methods, to produce Chinese Fevervine fibre (CF fibre). The compone...
Investigation of the Effect of Pile Height and Yarn Linear Density on the Performance Properties of Pile Loop and Cut-Pile Loop Knit Fabrics
This paper investigates the effects of fabric structural parameters such as pile yarn linear density (19.7, 22.7 and 24.6 tex), ground yarn linear density (100 and 78 dtex), sinker height (2.2 sinker; 2.5 sinker and 2.8...