Utilization of cellulose biomass by anaerobic digestion. Optimization of microbial fuel cell (MFC) parameters.
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 93, Issue
Abstract
Utilization of cellulose biomass by anaerobic digestion. Optimization of microbial fuel cell (MFC) paramaters.). Following work describes research concerning surface of electrodes as a limiting factor of power output in cellulose-fed Microbial Fuel Cell (MFC) device. Various combinations of anode and cathode surface were tested. The highest power density was obtained for MFC with the smallest anode area and 1:1 anode-tocathode area ration. Results achieved might suggest that scaling-up of MFC is more efficient by connection of many small units than by increasing size of one unit.
Authors and Affiliations
Renata Toczyłowska-Mamińska, Karolina Szymona, Monika Kloch
Keywords
Related Articles
- EP ID EP355939
- DOI -
- Views 86
- Downloads 0
Wood-polymeric materials on the basis of polyolefins - part 2. Thermaloxidative degradation and chemical reactions in the mixture of wood with polyolefines
Wood-polymeric materials on the basis of polyolefins - part 2. Thermal-oxidative degradation and chemical reactions in the mixture of wood with polyolefines. The conditions for radical formation had been studied in mixt...
Über das Klima in den Städten nach: Nehemia [456-443 v. Chr.], Raschi [1040-1105], Simeon ben Gamliel [1588], Junod [1855]
Über das Klima in den Städten nach: Nehemia [456-443 v. Chr.], Raschi [1040-1105], Simeon ben Gamliel [1588], Junod [1855]. Im nachfolgenden Artikel bringen die Autoren eine kurze Auswahl der Texte, die in den letzten 25...
The influence of the fast road on the content of some macro-elements in wood and bark of White mulberry (Morus alba L.)
The influence of the Fast Road on the content of some macro-elements in wood and bark of White mulberry (Morus alba L.) Samples for studies were collected from white mulberry tree grown in the close neighborhood of the f...
Messung der Formaldehydabgabe in der Holzwerkstoffproduktion in Echtzeit mithilfe eines Laseranalysator GasEye HCHO
Messung der Formaldehydabgabe in der Holzwerkstoffproduktion in Echtzeit mithilfe eines Laseranalysator GasEye HCHO. Die vorliegende Arbeit stellt Proben der Messung der Formaldehydabgabe mittels eines Laseranalysators a...
Economic justification for printing threaded joints for wood-based materials
Economic justification for printing threaded joints for wood-based materials. Screws are popular elements used to connect wood-based panels. They are typically made of metal, which means that their strength is 10- up to...