Vibrational Durability Test Methodology for an EGR Cooler
Journal Title: International Journal of Automotive Engineering and Technologies - Year 2017, Vol 6, Issue 1
Abstract
EGR Cooler is one of the key automotive components which use coolant to reduce exhaust gas during discharge through the air induction system. These automotive components are exposed to different types of vibrations such as simple sinusoidal or random excitations. This work presents vibration durability test methodology which is used for the EGR cooler of Heavy Duty Vehicle. Test set-up and procedures are developed to assess durability performance of the EGR on the electrodynamic shaker. Sine, random and sine on random test profiles are compared to show their effect of the EGR durability. In addition effect of the excessive test profiles are observed on the EGR in this work.
Authors and Affiliations
Savci, İ. Hakkı| Ford Otosan, Product Development Department, 34885, Istanbul, Turkey, Uluk, Berç| Ford Otosan, Product Development Department, 34885, Istanbul, Turkey, Kutlu, Mustafa| Ford Otosan, Product Development Department, 34885, Istanbul, Turkey
Keywords
Related Articles
- EP ID EP4056
- DOI -
- Views 459
- Downloads 26
Determination of the fuel properties of cottonseed oil methyl ester and its blends with diesel fuel
In this study; density, kinematic viscosity, calorific value, flash point and water content of methyl ester produced from cottonseed oil (CO) were determined under varying blend ratio with ultimate euro diesel fuel, also...
Performance of single-cylinder compression ignition engine with indigenous castor oil bio diesel
Neat castor oil poses problems when used in CI engine. Problems are reduced to minimum by subjecting the castor oil to transesterification. Castor oil was converted to bio diesel and blended by 5%, 10%, 15% and 20% in qu...
Performance and exhaust emissions of a spark ignition engine using G-Series and E20 fuels
In this research paper, performance and exhaust emissions of a spark ignition (SI) engine (XU7JP/L3) is presented. A gasoline-ethanol blend (E20) and G-Series fuel, of GS1 and GS2, which is a mixture of gasoline, ethanol...
PERFORMANCE, EXHAUST EMISSIONS AND COMBUSTION CHARACTERISTICS OF MOHR OIL BASED BIODIESEL IN A MEDIUM GRADE LOW HEAT REJECTION DIESEL ENGINE
Experiments were carried out to evaluate the performance of a mohr oil based biodiesel (MOBD) at different operating conditions [normal temperature and pre-heated temperature] in a medium grade low heat rejection (LHR) d...
Development of a bicycle anti-lock braking system prototype
In order to satisfy the increasing need for security and comfort the active safety systems of the smaller vehicles like the motorbikes, scooters, e-bikes and bicycles have an intensively studied research topic over the l...