Wood-polymeric materials on the basis of polyolefins - part 3. Chemical changes occurring in the secondary polyolefins at the thermo-oxidative effect on them
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 94, Issue
Abstract
Wood-polymeric materials on the basis of polyolefins - part 3. Chemical changes occurring in the secondary polyolefines at the thermo-oxidative effect on them. The conditions for radical formation in the secondary polyolefins at different temperatures has been studied. It has been shown that the secondary polyolefins observed in experimental conditions, the quantity of active macroradicals is larger than in the primary polyolefines and have directly proportional to the operating conditions.
Authors and Affiliations
Farkhod Magrupov, Iskandar Alimov, Sadritdin Turabdjanov, Piotr Borysiuk, Jadwiga Szydłowska
Keywords
Related Articles
- EP ID EP355951
- DOI -
- Views 61
- Downloads 0
Activated carbons from plant materials
Activated carbons from plant materials. The aim of this paper was to obtain a series of active carbons from different plant materials and to determine content of surface oxygen groups. Plant materials to be tested: rapes...
The investigations on colour and gloss of lacquer coatings on impregnated pine wood
The study presents results of the thermal aging of lacquer coatings formed on impregnated pine wood with the Pinadur® system under the conditions of the test container procedure. The appearance, colour and gloss unit of...
Cellulose fibers improve polystyrene properties
Cellulose fibers improve polystyrene properties. The paper presents the production stages for a hybrid thermal insulation material, composed of expanded polystyrene foam granulate and recycled cellulose fibers. It discus...
The production potential of the furniture market in Poland
The paper shows the comparative analyses relating to the production potential of the furniture market and manufacturing in Poland. Furniture industry among others also falls within that category. Therefore selected indic...
Influence of direction of cutting on cutting forces and quality during milling laminated MDF
Influence of direction of cutting on cutting forces and quality during milling laminated MDF. The aim of the experiment was to examine the influence of different milling types on value of cutting forces and surface quali...