Wpływ wybranych napełniaczy na właściwości ciernych materiałów hamulcowych
Journal Title: Tribologia - Year 2009, Vol 224, Issue 2
Abstract
Authors and Affiliations
Stanisław Nosal, Tomasz Orłowski
Keywords
Related Articles
- EP ID EP422608
- DOI -
- Views 38
- Downloads 0
THE INFLUENCE OF THE ADDITIVES OF PTFE OR Cu IN GREASE ON ITS LUBRICATION EFFICIENCY
The article presents the results of experimental studies on the effects of additives in grease on the lubrication efficiency (steel sliding nodes) of its compositions using one filler – powder PTFE (polytetrafluoroethyle...
CORROSIVE AND MECHANICAL WEAR OF 430 AND 321 STEEL IN SLIDING FRICTION CONDITIONS
The paper presents tests results of corrosive and mechanical wear of steel AISI 430 and AISI 321 in solution of 0,5M H2SO4. The experiments were performed with the use of a technical stand with a model pair type pin-on-d...
METHODS OF THE MODIFICATION OF VEGETABLE OILS IN ORDER TO OBTAIN BASE OILS
The research results were presented concerning the development of vegetable oil modification in order to obtain a base oil with desired physicochemical properties allowing the use of such oils as the base oil in pro-ecol...
CHOSEN TRIBOLOGICAL PROPERTIES OF FeAl ALLOYS
This research was focused on tribological properties of FeAl alloys. Powder and cast FeAl alloy was used in this study. The influence of the alloy morphology on its tribological properties is discussed. Tribological test...
WEAR OF PTFE SEALS IN THE BALL VALVES
The article presents the research results of leakage from ball valves. Leakage was measured for a new valve and after an assumed number of open/close cycles using the helium detection method. The roughness of a valve bal...