A MANUFACTURING METHOD OF THE STABILIZING WORKING OF DIES FOR THE PULSED STAMPING
Journal Title: Вісник Кременчуцького національного університету імені Михайла Остроградського - Year 2017, Vol 1, Issue 107
Abstract
Purpose. To development and select the method of the hardening-stabilizing treatment of the die mirror for the hydroexplosive stamping of thin sheet parts of a closed form. Methodology. The determination of new technological and physical effects under impulse action can be achieved using specialized methods of a directed synthesis, ordered and disordered search methods, among which the most promising one is the heuristic generalized method. The method of analyzing hierarchies, by paired comparisons, global and local priorities has been used. An analysis of the die operating conditions has been given and prevailing factors affecting the stability of dies have been found out. Physical and technical effects and principles inherent in the hardening treatment have been established and systemized. Based on the analysis of the production experience and schemes of the hardening treatment a method of selection of the way of die hardening has been developed. After the most appropriate method of the hardening treatment had been found, a grounding of the loading parameters during deformation hardening was carried out. Furthermore, on algorithm of controlling the structure and properties of the die material was made. Then an experimental verification of the hardening method effectiveness and mathematical modeling of the die hardening and stabilizing treatment using the finite element method was performed. Results. It has been found that the main reason for the die failure during the operation is the occurrence of irreversible plastic deformations of the forming surface. Originality. The experimental studies have been performed with a failed die. The modeling was carried out in the ANSYS AUTODYN software package clarifying the calculation results by considering the elastic un loading and unloading waves from the free die surface. The most effective method to eliminate the irreversible deformations of the forming surface of the die is the deformation explosive hardening. Practical value. The charge size is selected so that the deformations of the forming surface conform to the limiting uniform ones of the die material. For 600 mm die parts a 45 g charge is used, for 800 mm die parts a 150 g charge is used, for 1,000 mm die parts a 200 g charge is used and so on.
Authors and Affiliations
V. Dragobetsky, Е. Naumova, S. Shlyk, R. Rеyi, Yu. Salenko
Keywords
Related Articles
- EP ID EP660655
- DOI -
- Views 50
- Downloads 0
ALGORITHM OF INFORMATIVE AND ANALYTICAL SUPPORT OF PRODUCTION RISKS ASSESSMENT ON THE BASIS OF THE ELMERY METHOD
Purpose. The purpose of the given research is to analyze the existing approaches to the estimation of industrial risks, in particular, risks of accidents. One of the directions of the successful implementation of Europea...
PROBLEMS OF DESIGNING THE CONTENT OF PROFESSIONAL TRAINING FOR THE FUTURE SPECIALISTS IN BINARY SPECIALTIES
Purpose. To analyze the conceptual approaches to the interpretation of the essence and ways to overcome the crisis in education, to define the main stages of designing the content of training future specialists in certai...
THE ANALYSIS OF CURRENT METHODS OF INFORMATION SEARCH
Purpose. To analyze current methods of information search. In modern conditions of development of information technologies Internet and the search engine there is a need for new methods to ensure effective information se...
THE WAYS AND CONDITIONS FOR KHARKIV REGION INVESTMENT ACTIVITY INCREASING
Purpose. The existing conditions and ways of the increase of Kharkiv region investment activity have been analyzed on the basis of the actual economic and investment potential usage. The volume of capital investments a...
DETERMINATION OF RISKS IN TRANSPORTATION AND CHARGING OF LOCALLY PREPARED EMULSION EXPLOSIVES UNDER THE CONFORMITY WITH THE STANDARDS OF THE EUROPEAN UNION
Purpose. To determine risk factors during transportation and in the process of charging low-speed emulsion explosives of local preparation.Methodology.The method of mathematical analysis, based on the theory of probabili...