Analisa Pengendali Hybrid Sliding Mode Control dan PID Untuk Mengendalikan Concentration pada Isothermal Continuous Stirred Tank Reactor (CSTR)
Journal Title: Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) - Year 2018, Vol 5, Issue 1
Abstract
Systems in industry often occur in performance or desired performance. One of them isothermal CSTR system where the system has not been able to work according to the desired set point 1 g.mol / litter, to achieve the set point then used the controller Sliding Mode Control in Hybrid with PID in identification with FOPDT method to lower the value steady state error From the controller obtained results where the Sliding Mode Control Hybrid PID is able to not achieve set point value 1 g.mol / litter with ts = 3.0446 seconds.
Authors and Affiliations
Ahmad Faizal, Dian Mursyitah, Ewi Ismaredah, Muhammad Ikhsyan
Keywords
Related Articles
- EP ID EP550441
- DOI 10.33019/ecotipe.v5i1.29
- Views 66
- Downloads 0
Rancang Bangun Unipolar PWM untuk Pengendalian Rangkaian H-Bridge Menggunakan Operational Amplifier
Unipolar PWM control technique carried out by comparing triangular wave with two control voltages. The resulting pulses are used to control H-Bridge circuit. The technique can be done by using the functions of the operat...
Analisa Kinerja PAPR pada Sistem OWDM Menggunakan Wavelet Packet
In wireless communications, demand to provide high-speed data services with good performance raises new techniques to increase spectrum efficiency and improved signal quality due to frequency selective fading. OFDM is a...
Desain Pengendali PID – Gain Schedulling Untuk Pengendalian Posisi pada Sistem Magnetic Levitation Ball
This study propose a design of PID controller with gain schedulling optimization to controlling position for Magnetic Levitation Ball (Maglev) system. Design of PID controller with gain schedulling optimization are used...
Analisa Pengendali Hybrid Sliding Mode Control dan Fuzzy Logic Controller dalam Penurunan Error Steady State Untuk Mengendalikan Concentration pada Isothermal Continuous Stirred Tank Reactor (CSTR)
Systems in industry often occur in performance or desired performance. One of them isothermal CSTR system where the system has not been able to work according to the desired set point 1 g.mol / litter, to achieve the set...
Pemilihan Bahan Sudu untuk Perancangan dan Pembuatan Prototipe Turbin Angin Sumbu Horizontal
Electrical power is a a vital requirement for economic development and social development. Beyond the importance of the function of electrical energy for the community, it is very unfortunate that not all areas in Indone...