АНАЛИТИЧЕСКИЙ РАСЧЕТ ГЛАДКОСТИ СОПРЯЖЕНИЯ ПОВЕРХНОСТЕЙ И ТРАЕКТОРИЙ ФОРМООБРАЗОВАНИЯ ДЛЯ ИХ ОБРАБОТКИ НА СТАНКАХ С ЧПУ
Journal Title: BULLETIN of Kyiv Polytechnic Institute. Series INSTRUMENT MAKING - Year 2018, Vol 56, Issue 56
Abstract
The purpose of this work is to improve the cam mechanisms qualities under operating conditions. For present purpose, the task of determining the condition of smooth conjugation of the screw and radius surfaces of the cam running was set and solved as the simulating model for the CNC program of machine tools. This paper considers the processing of nonfolding surfaces, the geometric properties of which have not been studied sufficiently. Therefore, the smoothness of graphic packages does not always satisfy the design and technological conditions of the part from the point of view of tangency along the entire perimeter of the conjugating surfaces. In addition, it is not clear where the surfaces can be joined with the best smoothness of the surfaces and how this will affect the law of motion of the output link of the mechanism and its dynamic characteristics that depend on the monotony of the first and second derivatives. In this paper, the conjugation of surfaces is obtained on the basis of the laws of the mathematical concept of smoothness with an indication of the coordinates of their common generating line, according to which this property will be achieved. The obtained conditions for smooth conjugation of helical and radial surfaces, as well as the proposed scheme for their calculation, can be used as the basis for engineering design of complex technical surfaces, parts of which are joined according to smoothness conditions, i.e., have tangential transition between surfaces of different types. The method of kinematic obtaining of screw and radial surfaces by means of the functional ratio of the axial feeds of the machine with the CNC, calculated with parametrized modules has been considered. The tool for the development of this method and its prospects are new functionals for the regulation of axial feeds of modern CNC systems. The above scheme for calculating smoothness can be applied to a wide range of surfaces of the second order and, based on the results of calculations, build a program for machining parts on CNC machines. The cost-effectiveness of design solutions for smooth interfacing has been confirmed in the manufacture of copying mechanisms, increasing their reliability and durability
Authors and Affiliations
Alexander Leshchenko
Keywords
Related Articles
- EP ID EP568397
- DOI 10.20535/1970.56(2).2018.152453
- Views 171
- Downloads 0
МОДЕЛЮВАННЯ ТА ОЦІНКА ВПЛИВУ НАДВИСОКОЧАСТОТНОГО ВИПРОМІНЮВАННЯ НА БІОЛОГІЧНІ ТКАНИНИ
The influence of electromagnetic extremely high-frequency (EHF) millimeter-wave radiation on biological tissues was explored and its thermal effects were evaluated. An assessment of the EHF-radiation intensity of the Por...
СТЕНД ДЛЯ ПЕРЕВІРКИ ПРАЦЕЗДАТНОСТІ НИЗЬКОЧАСТОТНИХ ІНЕРЦІАЛЬНИХ МОДУЛІВ
Over time, the mechanical, electrical, and electronic parameters of any sensitive element of inertial sensors is change. For example, there are irreversible changes in the resistance of the sensor coils, which needed to...
МОДЕЛЮВАННЯ МІЛКОДИСПЕРСНОЇ ТВЕРДОТІЛЬНОЇ ЗОНИ ПРИСУТНОСТІ ТЕХНОЛОГІЧНОГО ОБ’ЄКТУ РІЗНОЇ КРИВИЗНИ ПОВЕРХНІ
The article deals with the study of the nature and distribution of discrete elements in the presence of an abstract object, provided that there is a contamination of the surface of the technological object. The basic typ...
КОРЕЛЯЦІЙНО-ОПТИЧНИЙ ПІДХІД ДО ПРОБЛЕМИ ГОЛОГРАФІЧНОЇ АСОЦІАТИВНОЇ ПАМ’ЯТІ
Holographic associative memory problem within correlation-optical approach is discussed. Early investigations of this problem (P. J. van Heerden, A. Vander Lugt, G. W. Stroke, R. J. Collier) based, mainly, on formal Four...
ОСОБЕННОСТИ КОМПЬЮТЕРНОГО МОДЕЛИРОВАНИЯ И РАСЧЕТ АБЕРРАЦИОННЫХ ХАРАКТЕРИСТИК ТЕЛЕСКОПИЧЕСКИХ СИСТЕМ
The study results of the features of computer modeling and aberrations analysis of afocal systems in comparison with other systems, where the image is located at a finite distance from the optical system are presented, i...