ANALYSIS OF THE IRREGULARLY SAMPLED SIGNALS ABOVE THE NYQUIST LIMIT
Journal Title: Metrology and Measurement Systems - Year 2006, Vol 13, Issue 3
Abstract
A new method of spectrum analysis of the nonuniformly sampled data above the Nyquist limit is proposed, which is based on the digital spectral shift to the baseband, optional filtering and the subsequent spectrum analysis below the Nyquist limit. The method is distinguished by low aliasing frequency estimation and sufficient computation effectiveness. The mathematical background is shown and simulation results are presented to illustrate the method basics.
Authors and Affiliations
RUMEN ARNAUDOV, ROSSEN MILETIEV
MEASUREMENT METHOD OF SHAPE DEVIATION OF CYLINDRICAL MICRO-LENSES USING FOCUSED LASER BEAM AND REFERENCE AXIS<br />
Constant progress in application of micro-lenses in many modern optical systems caused a continuous increase of the need to investigate methods of their measurement. A new method of measurement of shape deviation of such...
A NEURAL NETWORK BASED SYSTEM FOR SOFT FAULT DIAGNOSIS IN ELECTRONIC CIRCUITS
The paper considers the architecture and the main steps of development of a neural network based system for diagnosis of soft faults in analog electronic circuits. The definition of faults of interest, selection of an op...
A NEW TRANSDUCER OF DOUBLE PROCESSING FOR CAPACITIVE TOMOGRAPHY
The paper presents a new solution of a system for the measurement of small capacities, applied in capacitive tomography. Some known versions of transducers have been discussed. Next, the author has presented his own solu...
SIMPLE METHOD OF 3D ERROR COMPENSATION OF TRIGGERING PROBES ON COORDINATE MEASURING MACHINE
In this study an automatic, simple algorithm of systematic error corrections of a CMM touch triggering probe is proposed. The whole process does not exceed a standard calibration procedure done on coordinate machine befo...
SPECIFIC MASS FLOW RATE MEASUREMENTS IN A PULSATING FLOW OF GAS
The method of measurement of the specific mass flow rate in a pulsating flow by means of the Constant Temperature Anemometer (CTA) has been described. Special attention has been paid to the probe calibration problem. Dif...