Analysis of the Sound Field in Enclosures
Journal Title: Romanian Journal of Acoustics and Vibration - Year 2009, Vol 6, Issue 1
Abstract
Steady-state sound field in closed spaces may be calculated as a series of normal modes of oscilatings. Experimental results are not explained completely by this theory and for these differences should be an additional term representing the direct spherical radiation at the reverberant field. In the paper it is shown that the sound field contains the direct wave as well as the standing waves. In addition the paper shows the calculation particularity of the acoustic field in low frequencies.
Authors and Affiliations
Ioan Magheţi, Mariana Savu, Nicolae Enescu
Keywords
Related Articles
- EP ID EP160425
- DOI -
- Views 67
- Downloads 0
The Sound Distribution Uniformity Throughout the Multifunctional Hall „EUTHERPE”
In order to perform a full estimation of acoustic characteristics of public auditoriums there were defined „acoustic criteria” such as reverberation time, clearness index, intelligibility percent, uniformity index etc. T...
Finite Element Analysis of thin plates clamped on the rim of different geometric forms. Part II: The Absolute and Relative Variation of Natural Frequencies
In this paper, according to the natural frequencies resulted from the simulation for 30 vibration mode shapes of rectangular, square, trapeze and parallelogram plates that are analyzed with the SolidWorks program, the ab...
Analysis of the Sound Field in Enclosures
Steady-state sound field in closed spaces may be calculated as a series of normal modes of oscilatings. Experimental results are not explained completely by this theory and for these differences should be an additional t...
THE SOMMERFELD EFFECT
The Sommerfeld effect is a universal phenomenon which appears as a result of the law of energy conservation. Arnold Sommerfeld discovered this phenomenon in 1902, while making an experiment with a cantilever beam connect...
Industrial Noise Mapping – Support of an Anti-Noise Protection Program
The paper shows an approach to noise problems for an installation belonging to a complex industrial plant, containing noise sources located at different heights. A proper digital modeling of the relevant elements in term...