APPLICATION OF THE CENTRAL COMPOSITE ROTATABLE DESIGN IN THE OPTIMISATION OF PARAMETERS OF A BALL-CRATERING METHOD
Journal Title: Tribologia - Year 2013, Vol 252, Issue 6
Abstract
This article presents an outline of a method of planning an experiment known as the central composite rotatable design (CCRD) for the optimisation of processes and as an example of its application in the optimisation of parameters of a ball-cratering method. Abrasive wear tests were performed on chosen antiwear physical vapour deposition coating with the optimum work parameters of friction node. The presented method of determining the values of the parameters has been with reference to the tested PVD gradient coating TiN/TiCN.
Authors and Affiliations
Edyta OSUCH-SŁOMKA, Ryszard RUTA
Keywords
Related Articles
- EP ID EP269963
- DOI -
- Views 63
- Downloads 0
INTERACTION OF NOVEL LUBRICANT ADDITIVES BASED ON MoS2 NANOTUBES WITH NON-FERROUS TRIBOLOGICAL MATERIALS
MoS2 nanotubes (NTs) are novel lubricant additives reducing friction and wear of mechanical components made of steel. Nowadays, non-ferrous surfaces are becoming more widely used, mainly as multifunctional coatings worki...
TRIBOLOGICAL PROPERTIES OF DUPLEX COATINGS OBTAINED BY SEALING IN SUCCINIC ACID
The paper presents the tribological properties of duplex coatings obtained on aluminium alloy EN AW-5251 via hard anodising of aluminium in a multi-component electrolyte and subjected to sealing in succinic acid. Tribolo...
THE INFLUENCE OF THE TYPE OF BASE LIQUID OF GREASES ON FATIGUE WEAR OF MODEL FRICTION COUPLES
This work presents the characteristics of fatigue wear of the surface in anti-seizure bearing of model friction couple, lubricated with greases on the base of mineral oil and synthetic liquids. The influence of the lubri...
ANTIWEAR EFFICIENCY OF BIOADDITIVES IN SELECTED BASE OILS
It has been determined that the criteria for the evaluation of antiwear (AW) and extreme-pressure (EP) properties of products obtained from post refining wastes and model lubricants (based on poly-α-olefines and esters)...
THE WEAR PROCESS OF IMPACT MILL WORKING ELEMENTS AND WAYS OF MINIMIZING THE CONSEQUENCES OF THIS PROCESS
The paper presents an analysis of the factors affecting the intensity of the wear process of impact disk-pin mill, mainly its working parts – pins. Structural factors have been identified which were the following: the ar...