calculation of non-homogeneous anisotropic rectangular plates with arbitrary fixation on the contur
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 70
Abstract
For practical applications in engineering are important tables for determining deflections and internal forces of structures. Such tables for the isotropic case under various conditions of plate support on the contour are given in many works. As for the anisotropic plates, there are no such tables, with the exception of one Huber table compiled for a freely supported rectangular orthotropic plate, depending on the relationship between the stiffness values . Here is a method of calculating the non-homogeneous anisotropic rectangular plates with arbitrary fixation on the contour is set forth, which is reduced to a boundary value problem. To solve a system of equations in terms of displacements using finite difference method (FDM) in combination with different variations of analytical solutions. It is advisable to construct a numerical solution of the problem so that in difficult cases the support fixing and uploading solution sought, not directly, but in the form of amendments to the known solution for simple cases of reference to consolidate and uploading at finding the solutions which the analytical methods or the FDM with sparse mesh may be used. Given as examples are the results of calculation for a series of square orthotropic plates with a fixed boundary under the action of uniformly distributed load.
Authors and Affiliations
N. V. , Zavrak, P. P. Semchuk
Keywords
Related Articles
- EP ID EP505426
- DOI -
- Views 164
- Downloads 0
The strength of cement stone on mechanically activated portland slag cement
Discusses the effect of mechanical activation of Portland cement with slag additive on the kinetics of strength development of cement stone. It is established that mechanical activation allows you to enter in Portland ce...
Shear deformability of reinforced concrete beams, strengthened by FRCM system
The results of experimental studies of reinforced concrete beams shear strength without transverse reinforcement reinforced by the FRCM system are presented in this article. The purpose of this study is to establish the...
Review of the new state building codes and standards for engineering protection of territories, buildings and constructions from dangerous geological processes in complex engineering-geological conditions
The article provides an overview of the new state building codes (SBC) and standards (GOST) developed at the State Research Institute of Building Constructions (Kyiv, Ukraine). The norms regulate mandatory requirements t...
Normative base of ukraine for the design of bases and foundations of buildings and structures. Modern state and development prospects
The analysis of normative base of Ukraine and an overview of the new state building norms (DBN) and standards (DSTU) for the design of bases and foundations in normal and complicated engineering-geological conditions, de...
Determination of the influence of subway on the load-bearing structures of buildings with numerical methods
The article is devoted to numerical investigation of the vibration impact of subway on load-bearing structures of high-rise buildings. Parameters of the dynamic action of the rail transport (train, tram, metro) and the r...