Catching Of Stolen Vehicles With Unique Identification Code Using Embedded Systems
Journal Title: International Journal of Electronics Communication and Computer Technology - Year 2012, Vol 2, Issue 6
Abstract
The main purpose of this concept is to catch the stolen vehicles by a latest technology. This research work is developing a smart logic to identify the stolen vehicle on check post or Toll base. Still there is no technique to identify the vehicle on check posts by any mean. To employ this technology in use, we issue one unique identification code to every vehicle. This unique number is stored in the silicon chip and the chip is installed in the vehicle. No one can change this number because this UID chip is installed in the engine of the vehicle. This vehicle number is not available in the market. Now the vehicle is equipped with the UID code. This code is also stored in the Data base of check post or Toll base. Now when any vehicle passed through the check post/Toll then at the check post/Toll RF passive vehicle reader generates a 125 kHz frequency for decoding RF tag( which has been installed in the vehicle). If the data base does not find the stolen UID code then security gate gets OPEN and if the stolen UID code is matched with the data base then security gate remains closed and alarm becomes ON automatically and finally the stolen vehicle is caught.
Authors and Affiliations
Mahesh Kumar Shakya| Student ,M.Tech (VLSI Engg.) SGVU, Jaipur, India
Keywords
Related Articles
- EP ID EP8316
- DOI -
- Views 384
- Downloads 29
Stacked Design of Parasitically Gap Coupled Square Patches for Enhance the Antenna Bandwidth
A stacked arrangement of square patch antenna is proposed and analyzed in this paper. An antenna is designed by using glass epoxy-FR4 substrate. In the proposed stacked arrangement there are two patches: driven (lowe...
PAPR Reduction Using Low Complexity Partial Transmit Sequence Scheme for Scalable OFDM System
In this paper, Partial Transmit Sequence technique for reduction of Peak to Average power ratio (PAPR) has been proposed. Peak to average power ratio is the major issue of concern in Orthogonal Frequency Division Mul...
Generating Different Mobility Scenarios in Ad Hoc Networks
The purpose of mobility models is to describe typical terminal movement so that the analysis for these purposes can be made. Thus, the movement pattern of users plays an important role in performance analysis of mobi...
Design of Pulse Triggered FlipFlop for Low Power Applications
Most important challenge in modern VLSI design along with area and speed is the power consumption. Flip flop is the basic element in digital system which plays very important role. In this paper, a low power pulse tri...
A Study on Evolution of Communication
The communication involving voice and data has become an integral part as well as need of the modern society. Moreover it has reached an unexpected level as compared to the communication in ancient times. In this pape...