Classification of Structure Defects of Metal Matrix Castings with Saturated Reinforcement
Journal Title: Archiwum Odlewnictwa - Year 2012, Vol 12, Issue 3
Abstract
Definition of a composite [1] describes an ideal composite material with perfect structure. In real composite materials, structure is usually imperfect – composites contain various types of defects [2, 3–5], especially as the casted composites are of concern. The reason for this is a specific structure of castings, related to course of the manufacturing process. In case of metal matrix composite castings, especially regarding these manufactured by saturation, there is no classification of these defects [2, 4]. Classification of defects in castings of classic materials (cast iron, cast steel, non-ferrous alloys) is insufficient and requires completion of specific defects of mentioned materials. This problem (noted during manufacturing metal matrix composite castings with saturated reinforcement in Institute of Basic Technical Sciences of Maritime University Szczecin) has become a reason of starting work aimed at creating such classification. As a result, this paper was prepared. It can contribute to improvement of quality of studied materials and, as a consequence, improve the environment protection level.
Authors and Affiliations
K. Gawdzińska, D. Nagolska, M. Szweycer
Keywords
Related Articles
- EP ID EP72687
- DOI 10.2478/v10266-012-0077-y
- Views 89
- Downloads 0
Structure homogeneity as a parameter for evaluation of composite casting quality
The structure of composite materials is be usually described as a compound of two structural components called matrix and reinforcement, respectively. A classic, commonly known example is polyester resin reinforced with...
Replies to Challenges in the Field of Air Pollution Control in Foundry Plants
The solution of applications for air pollution control in foundries for iron and non-ferrous metals may not only be understood as the observance of requested emission limit values at the stack outlet. An effective enviro...
Laboratory grey cast iron continuous casting line with electromagnetic forced convection support
The article describes the construction of a 20 mm diameter grey cast iron ingots continuous casting laboratory line. This line is made of three main units: melting unit (induction furnace), casting unit and the pulling u...
A study on the structure and mechanical properties of vermicular cast iron with pearlitic-ferritic matrix
The results of studies on the use of magnesium alloy in modern cored wire injection method for production of vermicular graphite cast irons were described. The injection of Mg cored wire length is a treatment method whic...
Water mist effect on cooling process and microstructure of silumin
The paper presents the results of the process of crystallization and cooling of the AlSi11 silumin and temperature distribution in the wall of iron and bronze research casting die in the temperature field of 750 to 100°C...