Composition of Syngas Produced by Gasification of Agricultural Residue Briquettes
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 1
Abstract
This paper summarizes the results of an experimental study on the gasification of briquettes made from different agricultural residues. There were investigated the effects of operating parameters such as temperature and excess air ratio both with a direct influence on the composition of syngas and the heating value. The results indicate that the concentrations of N2, CO2 and CH4 increase with the increase in excess air ratio, while the concentrations of H2 and CO decrease. The heating value of the syngas was found to decrease with the increase in excess air ratio.
Authors and Affiliations
Daniela TASMA, Tănase PANAIT, Krisztina UZUNEANU, Cătălin MOCANU, Raluca-Cristina BUȚURCĂ
Keywords
Related Articles
- EP ID EP624507
- DOI -
- Views 98
- Downloads 0
Studies and Research on the Production of TiO2 and TiN Thin Films by Assisted Physical Vapor Deposition Magnetron Process
The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtain...
Superplastic Behavior of 2024 Aluminum Alloy Sheet Subjected to Thermomechanical Processing
This paper describes the superplastic behavior of the commercial 2024 aluminum alloy. The investigated alloy was processed in a 3 mm thick sheet form. The superplastic properties of the alloy were investigated using an u...
Laser Deposition of Bronze Aluminum on Steel Support
In order to rise the wear and corrosion resistance of 0.45% C superficial steel layers, a multilayer coating was tested by injection of powder with 88.3% Cu; 9.5% Al; 2.2% Fe in melted bath by CO2 continuous wave laser....
Method and Procedure for Checking the Accuracy of the Scan-Indexing System of the NDTUT Equipment for Immersion Technique
This paper deals with the proposal of a method and procedure to verify the accuracy of the scanning-indexing system of the NDT-UT facility for immersion technique, using comparison with a plate of aluminum alloy plate, p...
Research on Chemical Deposition of Silver with Antibacterial Role in Implantology
The paper presents a synthesis of the laboratory research on the conditions of achieving chemical deposition of silver on oral implants made of Ti base alloy (bioalloy Ti10Zr). There were used several chemical deposition...