Computer simulation of moving inertial loads
Journal Title: Roads and Bridges - Drogi i Mosty - Year 2010, Vol 9, Issue 1
Abstract
The paper presents algorithms for numerical finite element analysis of vibrations of structures under a moving inertial load. Some problems of dynamics of the structure are complex to be solved by the finite element method applied to spatial variables and by the Newmark method used for time domain. Peculiar features of analytical solutions of differential equations describing vibrations caused by a moving point mass must effect also their numerical solutions. Large gradients of solutions, jumps or discontinuities of solutions is difficult to obtain by the numerical discrete methods. These methods require approximations and introduce errors, which are difficult to be estimated. In this paper we discuss numerical solutions which allow us to obtain accurate results in a full range of velocity of the inertial load.
Authors and Affiliations
Bartłomiej Dyniewicz, Czesław Bajer
Analiza zmian temperatury stalowej konstrukcji mostu przez Wisłę w Puławach
W artykule przedstawiono dane dotyczące temperatury konstrukcji stalowego mostu przez Wisłę w Puławach. Dane na temat wartości temperatury w poszczególnych punktach mostu pozyskano z podsystemu monitoringu konstrukcji, k...
The use of FEM for thermal analyses of the asphalt pavement
The work concerns the transient heat flow in the pavement structure, for medium and heavy traffic. For both pavement structures the 5 variants with different heat conductivity coefficients were analyzed. The same boundar...
Viaduct construction with movable scaffolding system: distribution of the top slab weight
The construction of viaducts with Movable Scaffolding System (MSS) is a sophisticated. However, the construction sequence has a disadvantage of an insufficiently clear distribution of the top slab weight between the scaf...
Parametry rozdziału poprzecznego obciążeń w mostach
W pracy analizuje się dwa, klasyczne modele przęseł mostowych w postaci rusztu płaskiego i płyty ortotropowej, w zakresie przydatności parametrów charakterystycznych tych modeli do tworzenia rozdziału poprzecznego obcią...
Experimental analysis of inelastic buckling of steel columns subjected to corrosion in the salt spray chamber
Experimental investigation of inelastic buckling of previously corroded steel bars is described. The process of the corrosion was conducted in the salt spray chamber during 16 days. Buckling tests on slender bars were co...