COMPUTER TECHNOLOGIES IN THE FORMATION OF COMPUTED MODELS OF MONOLITHIC REINFORCED CONCRETE STRUCTURES

Abstract

The areas of application of concrete and reinforcement of higher grades for strength in structural elements of a monolithic reinforced concrete frame are considered. Analytic dependencies, criteria and boundary conditions are proposed that numerically describe the relationship between increasing the strength of concrete and reducing the consumption of reinforcing steel for bent and compressed-bent elements. Calculation-analytical models of the deformation state of overlaps of a monolithic reinforced concrete multi-storey frame have been developed on the basis of multifactor numerical studies carried out for various values of the thicknesses of ceilings, spans, operating loads, classes of concrete and reinforcement. Calculated parameters of slabs are determined, which determine their bearing capacity. On the basis of computer technology, the optimum section of a reinforced concrete element is modeled according to the criterion of reducing the material consumption and rational combination of classes of concrete and reinforcement.

Authors and Affiliations

Anatoliy I. Bedov, Aleksandr S. Salov, Azat I. Gabitov, Dmitriy М. Kuznetsov, Elza A. Sadykova

Keywords

Related Articles

MATHEMATIC MODEL OF A BEAM PARTIALLY SUPPORTED ON ELASTIC FOUNDATION

The paper presents the methodic for analytical determining of stress-strain state of a beam partially supported on elastic foundation at sudden damage of foundation structure (partial failure). Bending equation for a bea...

МОДЕЛИРОВАНИЕ КОЛЕБАНИЙ НЕЛИНЕЙНЫХ СИСТЕМ С УЧЁТОМ НЕЛОКАЛЬНОГО ДЕМПФИРОВАНИЯ

Статья посвящена анализу влияния учёта нелокального демпфирования на результаты компьютерного моделирования вынужденных колебаний нелинейной системы под действием детерминированной периодической и стохастической стациона...

MATHEMATICAL MODELING OF DIFFUSION PROCESSES OF MASS TRANSFER OF «FREE CALCIUM HYDROXIDE» DURING CORROSION OF CEMENT CONCRETES

The paper presents a mathematical model of mass transfer in the processes of corrosion of the first type of cement concrete at the level of phenomenological equations for a closed reservoir-liquid system. A step-by-step...

MATHEMATICAL MODELING OF NON-STATIONARY ELASTIC WAVES STRESSES UNDER A CONCENTRATED VERTICAL EXPOSURE IN THE FORM OF DELTA FUNCTIONS ON THE SURFACE OF THE HALF-PLANE (LAMB PROBLEM)

The problem of numerical simulation of longitudinal, transverse and surface waves on the free surface of an elastic half-plane is considered. The change of the elastic contour stress on the free surface of the half­plane...

ОЦЕНИВАНИЕ МАТРИЧНЫХ ПАРАМЕТРОВ КУСОЧНО-НЕПРЕРЫВНОЙ МОДЕЛИ НЕЛИНЕЙНОГО ОБЪЕКТА УПРАВЛЕНИЯ

В статье рассмотрены особенности оценивания матричных параметров кусочно-непрерывной модели по переходным процессам нелинейной модели объекта управления методом случайного поиска. Определен один из диапазонов возможного...

Download PDF file
  • EP ID EP576820
  • DOI 10.22337/2587-9618-2017-13-4-37-46
  • Views 71
  • Downloads 0

How To Cite

Anatoliy I. Bedov, Aleksandr S. Salov, Azat I. Gabitov, Dmitriy М. Kuznetsov, Elza A. Sadykova (2017). COMPUTER TECHNOLOGIES IN THE FORMATION OF COMPUTED MODELS OF MONOLITHIC REINFORCED CONCRETE STRUCTURES. International Journal for Computational Civil and Structural Engineering, 13(4), 37-46. https://europub.co.uk/articles/-A-576820