Contribution of Heat and ThermoChemical Treatments to the Improvement of the Performances of High-Speed Steel Tools
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 1
Abstract
The In this paper the influence of non-conventional heat and thermo chemical treatments upon the structure of tool steels and implicitly, upon the performances that are derived from applying such treatments, is presented. Reference is made to the conditions in which the heat and thermo chemical treatments in vacuum and in electrolyte baths are carried out. The advantages of these procedures are evidenced both from a technical as well as an economic standpoint. The experiments have been carried out on Rp3 and Rp5 steels, with application of vacuum at the final heat treatments.
Authors and Affiliations
Nicoleta TORODOC, Ioan GIACOMELLI
Keywords
Related Articles
- EP ID EP662903
- DOI -
- Views 68
- Downloads 0
Experimental Researches Concerning the Influence of the Oxynitrocarburizing Thermochemical Treatment over the Structure and Corrosion Resistance of C40 Steel
The aim of the paper is to present the results of the experimental researches regarding the corrosion behaviour of C40 steel, thermochemical treated by oxidant nitrocarburizing at 570 °C. The thermochemical treatment was...
Calculation of the Deposited Layer Thickness Through Side Injection of Powder Using CO2 Laser
The paper presents a simplified theoretical model for estimating the operating parameters of the laser deposition by injecting the powder into the metal bath. The study considered the influence of the powder particles on...
The Analysis of the Breaking Susceptibility of Some Feritic Stainless Steel
The growth of the world stainless steel conumption was the result of some new domains development, of some demands and special conditions undercooling not only the adaptability of this alloy but also the remarcable range...
Finite Element Analysis of Equal Channel Angular Pressing of Al-Mg 5083 Alloy
Bulk nanostructured materials represent the application of nanotechnology in the engineering material area. Severe Plastic Deformation (SPD) and in particular Equal Channel Angular Pressing (ECAP) are efficient and low c...
Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200 °C
The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is...