Design and Simulation of a New Optimized Full-Adder Using Carbon Nano Tube Technology
Journal Title: روش های هوشمند در صنعت برق - Year 2015, Vol 6, Issue 21
Abstract
The full adder circuit is one of the most significant and prominent fundamental parts in digital processors and integrated circuits since it can be used for implementing all four basic computational functions including: addition, subtraction, multiplication, and division. so, in this paper a new low power and high performance full adder cell has been proposed with the benefit of using carbon nano tube field effect transistors. The proposed design contains 12 CNTFET transistors which are connected in pass transistor logic style to make the desired functionality. Carbon Nano Tube Field Effect Transistor (CNTFET) has modified electrical characteristics such as low power consumption and high speed in comparison with MOSFET transistor; The proposed design is simulated using Hspice software based on CNTFET model and 0.65V supply voltage. the simulations are done considering three different frequencies, and three different load capacitors. The simulation results, which demonstrated in tables and diagrams, proved the superiority of proposed design in terms of power consumption and performance (PDP) compared to the existing counterparts.
Authors and Affiliations
Abbas Asadi Aghbolaghi, Mehran Emadi
New Prognostic Index to Detect the Severity of Asthma Automatically Using Signal Processing Techniques of Capnogram
In this paper, a new prognostic index to detect the severity of asthma by processing capnogram signals is presented. Previous studies have shown significant correlation between the capnogram and asthmatic patient. Howeve...
New DC/DC High Step Up Isolated Converter with ZVS
In this paper we presents a soft switch sepic, flyback converter. At first the converter have hard switching in main switch and completely analysis then added auxiliary circuit for soft switching Auxiliary circuit in the...
Overheating Recognition in Power Systems using Thermochromic Materials and Image Processing
According to the diagnosis of defects in electrical equipment to prevent accidents, damage and losses, it is necessary to work effectively in identifying defects so that we can predict and prevent errors. Nowadays, therm...
Design of a 12-Bit 200MS/S CMOS Sample-and-Hold Circuit
In this paper, a new 12bit, 200MS/s fully differential sample and hold circuit is presented. In order to increase the linearity and input voltage dynamic range; bootstrapped-switches are used for sampling the input signa...
Improved Angular Tracking Accuracy in Phased Array Radar
Monopulse is a technique which is used to detect radiation direction of waves. Radiation can be originated from active sources such as radar antennas, disturbances, etc., or passive sources, such as the reflector plates...