DESIGN AND SIMULATION OF CURRENT FEEDBACK OPERATIONAL AMPLIFIER IN 180nm AND 90nm CMOS PROCESSES
Journal Title: ICTACT Journal on Microelectronics - Year 2017, Vol 3, Issue 2
Abstract
This paper proposes a Current Feedback Operational Transconductance Amplifier (CFB OTA) with a folded cascode op-amp as input stage cascaded with class AB buffer as output stage. This gives better results on parameters such as bandwidth, slew rate, settling time and input offset voltage compared to the conventional CFOA. Hence it carries significance in high frequency applications such as A/D converters and active filters where CMOS CFOA used as an active building block. CADENCE simulation results are obtained using 180nm CMOS process (supply voltage of ±2.5V, 100µA biasing current) and 90nm CMOS process (supply voltage of ±1.2V, 50µA biasing current). Some of the performance parameters obtained are DC gain of 60.2dB, open-loop gain bandwidth product(GBW) of 307 MHz, slew rate (SR+) of +30V/µS to +90V/µS and DC input offset voltage of -0.6nV.
Authors and Affiliations
Sajin C S
Keywords
Related Articles
- EP ID EP386160
- DOI 10.21917/ijme.2017.0069
- Views 131
- Downloads 0
DESIGN AND ANALYSIS OF MULTIBAND OCTAGONAL MICROSTRIP PATCH ANTENNA WITH DIFFERENT ANNULAR RING
Microstrip patch antennas are available in different shapes and sizes. In this paper octagonal Microstrip patch antenna is designed. The octagonal patch antenna is simulated with different diameter concentric circles wit...
PATTERN AND POSITION DEPENDENT GATE LEAKAGE AND REDUCTION TECHNIQUE
The leakage power has become a vital downside in modern VLSI technology, with the advent in the area of high performance chips and portable electronics. Thus it is necessarily to invest more time and effort in designing...
VDTA BASED GROUNDED TO FLOATING ADMITTANCE ELECTRONICALLY CONVERTER
The Field Programmable Gate Array (FPGA) devices are quickly replacing the microcontrollers for embedded applications since they offer both the performance of hardware and flexibility of software In this article, a new g...
LOW POWER RF SINGLE BALANCED MIXER WITH HIGH CONVERSION GAIN FOR ISM BAND APPLICATIONS
This paper involves the design and simulation of a single balanced down conversion mixer from a Gilbert cell mixer using a source degeneration inductor and folded structure in 65nm CMOS Technology. The proposed single ba...
A COMPARATIVE STUDY OF DIFFERENT TYPES OF MIXER TOPOLOGIES
In this paper, a comparative study of different types of mixer topologies is presented. Gilbert cell is widely used as core of the mixer because it provides high conversion gain, good port-to-port isolation and low even-...