Determination of Range Parameters of Observation Devices on the Basis of Laboratory Measurements
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2014, Vol 5, Issue 2
Abstract
The paper presents two most reliable methods used to determine the range performance of observation devices – Johnson criteria and the TTP model. Johnson criteria is used in NATO standards to determine the probability of detection, recognition and identification of standard NATO targets. TTP model is the latest concept to estimate the range parameters of observation devices, developed and used mainly by US military laboratories. The paper presents simplified description of a method applied to determine the range parameters on the basis of laboratory measurements. It provides the list of parameters and measurement methods required to estimate the detection, recognition and identification ranges according to both Johnson criteria and TTP model. Sample results obtained for thermal cameras and short model analysis are also presented.
Authors and Affiliations
Jarosław BAREŁA, Mariusz KASTEK, Krzysztof FIRMANTY
Keywords
Related Articles
- EP ID EP62967
- DOI -
- Views 89
- Downloads 0
Renewable Energy Sources – Selected Problems
The paper presents selected issues on several renewable energy sources (RES) such as: wind, solar, and geothermal energy from the Earth's interior. Based on the available literature an assessment of the energy sources av...
Analiza numeryczna działania układu tłoka gazowego z suwadłem w karabinkach podstawowych Modułowego Systemu Broni Strzeleckiej kalibru 5,56 mm
Celem artykułu jest przedstawienie możliwości wykorzystania symulacji komputerowej do opisu działania układu tłoka gazowego z suwadłem w opracowywanych karabinkach podstawowych Modułowego Systemu Broni Strzeleckiej kalib...
Modal Analysis of a Discrete System in the Form of a Rocket Launcher Installed on a Motor Vehicle
A discrete model of an unguided rocket missile launcher installed on a motor vehicle was developed on the basis of a real assembly. The model is simplified to a vertical plane; it has four degrees of freedom and is adapt...
Characterization of Al Based Coatings Deposited by PVD Technique onto Samples Made from High Speed Steel
The paper deals with evaluation of selected properties of TiAlN and CrAlN coatings deposited by PVD technique on specimens from the high speed steel HS6-5-2-5 (STN 19 852). There were evaluated tribological properties su...
Production Technology of 30 mm Steel Cartridge Case in FPS Bolechowo
In the paper the bases of production technology of steel cartridge cases for 30mm caliber anti-aircraft ammunition are presented. Particular stages of production technology are described: selection of chemical compositio...