Effect of Cold Rolling on Interfacial Microstructure and Properties of Ti-Al Roll-casted Composite Plate
Journal Title: 河南科技大学学报（自然科学版） - Year 2017, Vol 38, Issue 1
Abstract
The Ti-Al composite plate was prepared by cast-rolling method and cold rolling. Mechanical properties of different deformations of composite plate were detected by universal testing machine. The microhardness near the interface layer was measured by the microhardness tester. The microstructure,tensile fracture morphology and interface combination were observed by the optical microscope and scanning electron microscope( SEM). The results show that the micro hardness of both sides of the interface layer improves gradually with the increase of reduction ratio. When the reduction ratio is 23%,the tensile strength of the composite plate increases from 172 MPa to 215 MPa,but the elongation decreases from 34% to 16%,meanwhile the interfacial layer only has a little crack. With the increase of reduction ratio,the tensile strength increases slowly,but the cracks length and width of the interfacial layer increase rapidly and the interfacial layer becomes thinner rapidly. When the reduction ratio is 53%,the interfacial layer is damaged seriously,and the main combination of Ti and Al changes from the metallurgical bonding into the mechanical engagement.
Authors and Affiliations
Shiqin SHI, Wenyan WANG, Zhengping SHANG, Chang SHAO, Jingpei XIE
Keywords
Related Articles
- EP ID EP477796
- DOI -
- Views 93
- Downloads 0
Calibration Method of Microscopic Damage Parameter Based on Power Exponential Hardening Model
The calibration of damage parameters were always the bottleneck of GTN microscopic damage model in engineering application. Whether parameter selection was reasonable or not directly affected the accuracy of the simulati...
Modifying Optimization and Experimental Verification of Hybrid Transmission Gear
The exciting force generated by gear system caused the box vibration in the depth hybrid transmission. The poor gear contact state was the main source of transmission noise. By using Kiss soft software,the simulation mod...
Effect of Nb and Ta Alloying on Microstructure and Thin Film Texture of Mo Alloy Target
Mo-Nb and Mo-Ta alloy targets were fabricated by mould pressing and vacuum hot-pressing sintering technology. Mo films with different thicknesses were deposited on thin film transistor-liquid crystal display ( TFT-LCD) a...
Application of Sensitivity Analysis to Optimization of Vehicle Interior Noise
In view of the noise problem of sport utility vehicle ( SUV) , an acoustic structure coupling model for the vehicle body was established. The acoustic response of the vehicle under the steady stimulation on the left engi...
Design of Alternating Current Charging Spot Control System for Electric Vehicle
By analyzing the system structure and working principles of alternative current( AC) charging spot,the control system of AC charging spot for electric vehicle was designed based on STM32 processor. The basic functions an...