Effect of ring notch radius on the decohesion mode in AlSi alloys
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
The article discusses the effect of the, determined by tensile test, non-linear characteristics of AlSi alloys on the value of the shape factor k for the three different sizes of the radius of the ring notch made on round specimens. Applying a numerical solution, the changes of stress in the notch plane were determined in function of the notch configuration and the value of instantaneous load. Tensile tests were carried out on round bars with ring notches. The appearance of fractures was examined on scanning images. Differences in notch effect observed in the linear-elastic and elastic-plastic model of material hardening in a non-linear mode were described.
Authors and Affiliations
J. Piekło, Maria Maj
Keywords
Related Articles
- EP ID EP70441
- DOI -
- Views 168
- Downloads 0
Application of calorimetry in evaluation of phase transformations in the selected hypoeutectic silumins
The investigations of phase transformations described in this study were carried out on hypoeutectic alloys from the Al-Si during heating and cooling. The determination and analysis of characteristic temperature values f...
Application of heat treatment and hot extrusion processes to improve mechanical properties of the AZ91 alloy
The main aim of this paper is to evaluate the effects of hot working (extrusion) and hest treatment on room temperature mechanical properties of magnesium-based AZ91 alloy. The results were compared with as-cast conditio...
Crystallisation and microstructure of low-silicon silumins with alloy additions
The paper presents the results of the analysis of crystallisation and microstructure of non-alloy silumins that contain: 2,0÷6,0% of Si and alloy additions, approximately: 4,0% Ni, 4,0% of Cu and 0,5% of Mg, the knowledg...
Fractographic research of the C45 steel remelted with a plasma of electric arc
This work presents research into properties of the surface layer of the C45 steel following the treatment with highly-focused thermal stream utilizing the GTAW method. The remelting of the surface layer of the sample was...
Quality of carburizers and its influence on carburization process
In the papers issue of production the synthetic cast iron obtaining on the basis of only steel scrap and carburizing materials are presented. Natural graphite, synthetic graphite, anthracite, petroleum coke, foundry coke...