Electric Vehicle Test System of Indoor Bench Test Platform
Journal Title: 河南科技大学学报（自然科学版） - Year 2018, Vol 39, Issue 2
Abstract
The response capacity and fast switching ability of the traditional dynamometer platform were poor, which was difficult to directly apply to the new electric vehicle power system testing. Therefore, the indoor bench Labview test platform based on the electric power dynamometer was designed for electric vehicle test system.Firstly, the load simulation principle and dynamic switching proportion integration differentiation ( PID) control strategy based on nine point control of the test platform were analyzed, and the hardware platform of the test system was constructed. Then the advanced vehicle simulator ( ADVISOR) was used for model and simulation to acquire the test data. Finally, the power system was tested on the test platform to complete the electric vehicle dynamic test.The results show that the power dynamometer realizes the fast and stable switching of the two quadrants of the motor. The bench system simulates the electric vehicle running condition and completes the performance test of the power system.
Authors and Affiliations
Hailong WU, Xiaoming SUN, Chen LU
Keywords
Related Articles
- EP ID EP464822
- DOI -
- Views 57
- Downloads 0
Coordinated Frequency Control Strategy of Multi-terminal High Voltage Direct Current System
For the problem of frequency regulation in the multi-terminal high voltage direct current (MTHVDC) systems, a distributed intermittent sampled data cooperative control algorithm was proposed.Considering the effect of con...
Motor Control of Pure Electric Vehicle Based on BP Fuzzy Neural Network Control
A proportional integral( PI) controller was designed based on back propagation( BP) fuzzy neural network to solve the problem that traditional PI control could not reach good control effect of the motor. Driver operation...
Prediction of Bond Strength Between Lithium Slag-Polypropylene Fiber Concrete and HRB500 Steel
In order to predict the bond strength between lithium slag-polypropylene fiber concrete and HRB500 steel,the multivariate nonlinear model of bond strength and influencing factors was established based on the nonlinear ch...
Potential Drift Compensation Technology of pH Online Monitoring in Deep Aquifer
The long-time and online monitoring of p H was restricted by potential drift. The influence factors of potential drift were discussed in p H long-time and online monitoring, and the critical factors was confirmed.Based o...
Preparation and Tribological Properties of Ni Based Wear Resistant Coating by Plasma Cladding
The Ni based wear-resistant coating was prepared by plasma cladding technology on the surface of 20 steel by using the commercial WF260 alloy powders. The friction and wear behavior of the coating under dry friction cond...