Electrical and optical parameters of Cu6PS5I-based thin films deposited using magnetron sputtering

Abstract

Cu6PS5I-based thin films were deposited onto silicate glass substrates by non-reactive radio-frequency magnetron sputtering. The chemical composition of thin films was determined using energy-dispersive X-ray spectroscopy. Electrical conductivity of Cu6PS5I-based thin films was studied as dependent on chemical composition. Optical transmission spectra of Cu5.46P1.68S5.06I0.80 thin film were investigated within the temperature interval 77…300 K; temperature behaviour of optical absorption spectra and dispersion of the refractive index were also studied. Temperature dependences of the energy position of absorption edge, Urbach energy and refractive index of Cu5.46P1.68S5.06I0.80 thin film have been analyzed.

Authors and Affiliations

I. P. Studenyak, A. V. Bendak, V. Yu. Izai, P. P. Guranich, P Kúš, M. Mikula, B. Grančič, J. Gregus, A. Vincze, T. Roch, T Plecenik

Keywords

Related Articles

Electron and hole effective masses in heavily boron doped silicon nanostructures determined using cyclotron resonance experiments

We present the experimental and theoretical results of analysis of the optically- induced cyclotron resonance measurements carried out using the charge carriers in silicon (Si) nanostructures at 9 GHz and 4 K. Effective...

Semiconductor surface spectroscopy using transverse acousto-electric effect: Role of surface charge in photo-processes at the ZnS/Si interface

The effect of illumination in the visible spectral range on the magnitude of transverse acoustoelectric effect (TAE) in ZnS/Si structures was studied using a noncontact surface acoustic wave device based on the acoustoel...

Multiferroic based on nematic liquid crystal and nanoparticles

Multiferroics stable in morphological parameters has been created by introducing ferromagnetic (Fe2O3) and ferroelectric (LiNbO3) nanoparticles with the concentration 0.3 wt.% into nematic liquid crystal 6СНВТ. Being bas...

Analysis of the silicon solar cells efficiency. Type of doping and level optimization

The theoretical analysis of photovoltaic conversion efficiency of highly effective silicon solar cells (SC) has been performed for n-type and p-type bases. Considered here is the case when the Shockley–Read–Hall recombin...

Degradation processes in LED modules

Electrical-heat-light degradation model of a light-emitting module has been developed in this work. The Monte-Carlo method was used to calculate the reliability time of LED modules with different halfwidth of LED chip se...

Download PDF file
  • EP ID EP177870
  • DOI 10.15407/spqeo19.01.079
  • Views 94
  • Downloads 0

How To Cite

I. P. Studenyak, A. V. Bendak, V. Yu. Izai, P. P. Guranich, P Kúš, M. Mikula, B. Grančič, J. Gregus, A. Vincze, T. Roch, T Plecenik (2016). Electrical and optical parameters of Cu6PS5I-based thin films deposited using magnetron sputtering. Semiconductor Physics, Quantum Electronics and Optoelectronics, 19(1), 79-83. https://europub.co.uk/articles/-A-177870