EVALUATION OF THE FLOW ACCELERATED CORROSION OF COPPER PIPES
Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2010, Vol 17, Issue 4
Abstract
Corrosion behavior of the Cu pipe system has been investigated by long term experiment. The two identical experimental systems were made and fulfilled by the solution of 3 % NaCl. The work medium in the first system was flowing eight hour in day and in the second the medium was stagnant. The systems were subjected eight hour in day to temperature of 80°C. After eleven month the experiment was finished and the corrosion attack and character of corrosion products in the systems have been investigated by light and SEM microscopy, EIS tests and visually too.
Authors and Affiliations
Tatiana Liptáková, Pavol Fajnor, Alexander Dodek
INFLUENCE OF GRAIN SIZE ON DUCTILITY OF MAGNESIUM ALLOYS
The paper give a brief overview on the effect of grain size on the yield strength and the elongation to fracture (ductility) of magnesium alloys. The yield stress, flow stress and fracture stress decrese with decreasing...
SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
The contribution describes influence of the heat treatment (solution treatment at temperature 545°C and 565°C with different holding time 2, 4, 8, 16 and 32 hours; than water quenching at 40°C and natural aging at room t...
Influence of the surface finishing on the corrosion behaviour of AISI 316L stainless steel
The influence of the surface preparation of AISI 316L stainless steel by mechanical grinding, polishing and following passivation was examined by immersion corrosion tests in solution simulating body fluids. Decreasing o...
PITTING CORROSION OF STAINLESS STEEL AT THE VARIOUS SURFACE TREATMENT
The stainless steel surface treatment is very important with regard to its pitting corrosion susceptibility. An effect of various types surfacing on pitting corrosion resistance of AISI 304stainless steel is investigated...
THE EFFECT OF THE ANNEALING TEMPERATURE ON THE CORROSION RESISTANCE OF WELD JOINT OF AISI 310 STEEL - SHORT COMMUNICATION
The article presents samples of weld joint of AISI 310 austenitic steel which were subjected to solution annealing at various temperature - time exposures. The objective of the experiment was to determine the annealin...