Flexural Performance Numerical Model Analysis of Transverse Welded Joints in Prefabricated Diaphragm Walls
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 12
Abstract
［Objective］ The transverse joints within the panels of prefabricated diaphragm walls are the weak points in the entire wall structure. Therefore, it is necessary to study the stiffness and strength characteristics of these joints. ［Method］ In conjunction with prefabricated diaphragm walls commonly used in foundation pit engineering, a new type of transverse welded joints for prefabricated diaphragm walls is introduced. The force and deformation behavior of this new joint under bending moment actions are studied using numerical simulation methods. ［Result & Conclusion］ Under bending moment actions, the tensile stress in the concrete at the end of the angle steel on joint tensile side is the highest, while the compressive stress in the concrete at this position on joint compressive side is the highest. The failure of the joint begins with cracks of the concrete on tensile side. The deflection curve of the component shows no significant mutation at the joint, indicating good deformation performance of the joint, which effectively prevents water leakage. The stress in the angle steel, weld, and rebar on joint tensile side is greater than that on the compressive side. After cracks appear in the concrete on the tensile side, the stress in the angle steel, weld, and rebar of the prefabricated component remains at a low level.
Authors and Affiliations
Tao CUI
Keywords
Related Articles
- EP ID EP752730
- DOI 10.16037/j.1007-869x.2024.12.025
- Views 18
- Downloads 0
Design and Experimental Verification of Urban Rail Transit Flexible Formation Train Reconnection Functionality
Objective During off-peak hours, large train departure interval is adopted for off-peak urban rail transit passenger flow, however, it is commonly faced with issues of low seat occupancy rates and high energy consumption...
Scheme of High Speed Contact Rail System for 120 km/h and above
Objective In order to meet the demand for traction current collection in rail transit at the speed of 120 km/h and above, the research on high speed contact rail system is conducted and a complete optimization scheme is...
Comparative Analysis of Balanced Maintenance System and Scheduled Maintenance System for Urban Rail Transit Vehicle
[Objective] In order to reduce the purchase cost and operation and maintenance cost of urban rail transit vehicles as much as possible, balanced maintenance system is adopted in some cities in China. Therefore, it is nec...
Comparative Validation of Laser Scanning and Traditional Measurement Methods for Tunnel Convergence
［Objective］ Although traditional single-point measurement methods offer high accuracy in metro tunnel monitoring, their high labor, material, and financial costs limit economic benefit maximization, difficult to meet t...
Planning Scheme of Shenzhen Airport East Comprehensive Transportation Hub for Air-Rail Intermodal Integration
Objective In recent years, China actively promotes the development of air-rail intermodal transportation. However, as a complex system with aviation and high-speed rail two major external transportation modes meeting, th...