Galerkin–Vlasov Method for Deflection Analysis of Isotropic Sandwich Plates under Uniform Load
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 1
Abstract
In this work, the Galerkin–Vlasov method was used to solve the governing partial differential equation of equilibrium for isotropic sandwich plates with simply supported edges (x = ±a, y = ±b) and under uniform load on the plate domain Vlasov procedure was adopted in choosing the displacement shape functions as orthogonal eigen functions of dynamic Euler Bernoulli beams with equivalent spans, simple supports and loading as the plate. The resulting Galerkin-Vlasov equation was solved to obtain the unknown generalised shape function. It was found that the deflections obtained were exact solutions to the problem of bending isotropic sandwich plates. The deflection was found to be made up of two components: flexural deformation and shear deformation.
Authors and Affiliations
B. O. Mama, C. C. Ike
Keywords
Related Articles
- EP ID EP412435
- DOI 10.21272/jes.2018.5(1).d3
- Views 92
- Downloads 0
Influence of the Wall Thickness Value on the Cross Wall Thickness Deviation of Tubes Rolled on the Tube Rolling Plant with the Continuous Mill
The high requirements as to accuracy of the wall thickness are due not only to necessity of assuring the reliability and serviceability of equipment, but also to the trend towards the continuous decrease of metal capacit...
Influence of an Inlet Rotating Axial Device on the Cavitation Processes in a Low Specific Speed Centrifugal Pump
The paper is devoted to the analysis of the cavitation processes in the flow section of the low specific speed centrifugal pump. A new conception of double-entry hermetic pump leads to the application of special shaped i...
Mathematical Modeling of the Mechanical Characteristic of the Activated PTFE-Matrix Using the Method of Planning the Experiment
In this paper, the influence of the parameters of the technological process of mechanical activation on the physical characteristics of the polytetrafluoroethylene (PTFE) matrix is investigated. The paper presents a math...
Model of the management program for a means complex of the design works automation as a finite-state automaton
For software development it is necessary to have its mathematical model. It is established that for a means complex of the design works automation a model of a finite automaton is the best choice. The automatic machine h...
Report on laboratory research of power-efficient triple-nozzle tuyere oxygen lancing
Based on the analysis of the advantages and shortcomings of the oxygen-converter production in Ukraine with combined oxygen and neutral gas blowing, a new combined-blowing technology by a threelevel lance has been propos...