Heavy Metals and Physico-Chemical Parameters Analysis from the Wells in the Buhoci Area, Bacau
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2017, Vol 40, Issue 4
Abstract
The study purpose is to analyze the heavy metals concentrations in the water from the Buhoci area wells and to evaluate the physico-chemical parameters of this water. Measurement of physico-chemical parameters were performed on site in five locality points using portable equipment. Heavy metals from these samples were analyzed in the laboratory of Hydrogeology, Politecnico di Torino, Italy. The analyzed water sources are used for domestic consumption. The results of the physico-chemical parameters comparative analysis fall within the limits admitted according to the requirements of Romanian Law no. 458 of July 8, 2002 with values in the range of: pH ≥ 6.5 - ≤ 9.5; turbidity (oC) ≤ 5; conductivity (μS/cm) ≤ 2,500.
Authors and Affiliations
Alina COCHIORCA, Valentin NEDEFF, Adriano FIORUCCI, Mirela PANAINTE-LEHĂDUȘ, Narcis BÂRSAN, Oana IRIMIA
Keywords
Related Articles
- EP ID EP572994
- DOI -
- Views 107
- Downloads 0
Dust Emissions from an Integrated Steel Mill in Correlation with Human Exposure and their Adverse Health Effects
Many of the metallurgical operations contribute to generation of the dust emissions if these are not properly controlled and managed. The relevant sectors as important sources for airborne dust are: coke oven plant, sint...
Grain Refinement in Aluminum Alloys by Acoustic Cavitation Phenomena
In this article, ultrasonic method of transmitting forced vibrations to solidifying aluminum-alloy melts is presented. In the presence of well developed cavitation situations, a fine and homogeneous microstructure has b...
Influence of Rib Thickness on the Solidification of Cast Parts
The ribs applied to the walls of cast parts are designed for enhancing both stiffness and aesthetics. The presence of ribs modifies the conditions of heat transmission and implicitly the solidification of the alloy in th...
Creating Integrated System Between Lifecycle Quality Management and Finite Element Analysis to Improve Typical Turbine Blade Design as a Case Study
This article proposes a process to integrate efficiently the Finite Element Analysis in the Quality Life-Cycle Management in order to use the simulation engineering in analyzing and improving the design of one industrial...
Superplastic Behavior of 2024 Aluminum Alloy Sheet Subjected to Thermomechanical Processing
This paper describes the superplastic behavior of the commercial 2024 aluminum alloy. The investigated alloy was processed in a 3 mm thick sheet form. The superplastic properties of the alloy were investigated using an u...