Implementation of a Sample Test System for an Autonomous Wind Energy System
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2019, Vol 7, Issue 1
Abstract
Many studies have been made in terms of mechanical and electrical related to using of convert the wind energy into electrical energy. The mechanical studies are generally wind turbine and special type machine designs. The electrical studies are the studies on power converter circuits, grid integration, and maximum power point tracking. A wind energy conversion system (WECS) is required to perform electrical studies. However, if there is no possibility to study in a wind power plant, the real-time model of the wind energy system should be established in the laboratory environment. The WECSs can be in many different topologies. Generally; the WECSs consist of wind turbine/wind turbine emulator, generator and power converter units. Although much work has been done in the literature on this topic, it is not possible to obtain detailed information about the established real-time system model. In this study, considering this aim, the real-time wind energy system is presented in detail and it is aimed to shed light on the researchers working in this field. The graph of the performance coefficient required for maximum power point tracking in the established experimental setup has been obtained and it was shown that the established experimental setup is similar to the real wind energy system. In addition, the system has been operated at maximum power point by applying the designed control algorithm to the system for a constant wind speed.
Authors and Affiliations
Ersagun Kürşat YAYLACI, İrfan YAZICI
Keywords
Related Articles
- EP ID EP491407
- DOI 10.29109/gujsc.468704
- Views 94
- Downloads 0
End-of-Life Vehicle Reverse Logistics Network Design and Modeling for Meeting Higher Targets of Legislation
Proper design of recycling networks has become an important issue both in developed and developing countries because of governmental regulations limiting the amount of waste buried, economic and ecological benefits and i...
Implant Surface Micro-fabrication and Characterization in Q-Switched Mode with ytterium-doped Fiber Laser
Surface morphologies of titanium implants has crucial importance for long-term stability which following their placement. Different techniques of surface modifications were adopted to increase bone–implant interface. Tod...
3D Printed Ceramic Vases
In this study, design and production processes of ceramic vases inspired with different geometrical shapes and produced with three-dimensional printers have been examined. When ceramics are being designed, polygons and p...
Experimental and Numerical Analysis of Shear Force in AISI P20 Steel Processing
This study consists of two parts as experimental measurement and numerical analysis of shear forces in AISI P20 steel turning with cementitious carbide cutting tool. In the experimental study, cylindrical turning was per...
Production Methods for Nano Materials
This paper presents the review of manufacturing processes for nanoparticle and nanowires as well as general manufacturing approaches for nanomaterials. It defines nanotechnology and nanomaterials, and gives information a...